1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 10
  1. MofoG23
    Post

    Would like you guys' opinion on these splitters

    My $0.02, go for a Subaru Robin engine if its an option...I have one on my splitter and generator - both have performed extremely well. Quiet,...
    Post by: MofoG23, Feb 26, 2013 in forum: The Gear
  2. MofoG23
    Post

    Synthetic oil in Splitters engine?

    Mobil 1 5-30 goes into all of my small engines, including the splitter.
    Post by: MofoG23, Feb 26, 2013 in forum: The Gear
  3. MofoG23
    Post

    Snow blower

    Make sure you get something that is a 2 stage blower. More HP, the better.... :) I have an older 2 stage blower - 24" path with a 5hp snow...
    Post by: MofoG23, Feb 11, 2013 in forum: The Gear
  4. MofoG23
    Post

    Post a pic of your woodhauler

    I need to get an update picture although not much has changed... 1976 K20 - 350 mated to the SM465/NP205 drivetrain with approx 74k on the clock....
    Post by: MofoG23, Feb 11, 2013 in forum: The Gear
  5. MofoG23
    Post

    10 degrees and can't keep up....

    When it gets into the single digits, before we had our insert...our furnace would run 12-14 hours a day to keep the house at 68 (65 at night). Now on...
    Post by: MofoG23, Jan 26, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  6. MofoG23
    Post

    Stove Lighter?

    Next to my fire extinguisher near my kitchen - not in the same room as my insert. I would hope everyone has enough common sense to not leave a...
    Post by: MofoG23, Jan 9, 2013 in forum: The Gear
  7. MofoG23
    Post

    Stove Lighter?

    Yep, that's what I have been using for the last couple seasons...wife gave me a few strange looks the first time I used it though. :) TS8000 is...
    Post by: MofoG23, Jan 9, 2013 in forum: The Gear
  8. MofoG23
    Post

    Advertised max burn times? Likelihood of achieving it?

    I take temps with an IR gun right above the door in the center (below blower output). Here is a picture from my other thread linked above. This...
    Post by: MofoG23, Dec 27, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  9. MofoG23
    Post

    Advertised max burn times? Likelihood of achieving it?

    Depends. My 4100i does not have a set "low" or "high" setting - its a variable rheostat. On very cold nights, I'll have to close to max...avg...
    Post by: MofoG23, Dec 27, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  10. MofoG23
    Post

    Advertised max burn times? Likelihood of achieving it?

    Surface temp (front of the stove, above the door). The biggest thing that helped my overall burn time at night was using very seasoned hardwood...
    Post by: MofoG23, Dec 27, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  11. MofoG23
    Post

    Advertised max burn times? Likelihood of achieving it?

    My Quadrafire 4100i is not too far off from factory specifications. They state "up to 12 hour burn time". My regular routine is to load up at 9:30pm...
    Post by: MofoG23, Dec 27, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  12. MofoG23
    Post

    Quadrafire 4100i vs 5100i vs Voyager Grand Insert

    I'm also heating a drafty 1700 sqft house without an issue using a 4100i. If I was trying to heat a larger house (2000+ sqft), no question I'd go...
    Post by: MofoG23, Dec 26, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  13. MofoG23
    Post

    Round Oak to QuadraFire

    Must be the chimney. Mine is right around 24/25ft (6" insulated liner installed) and when my 4100i gets going, there are times I wish I had a...
    Post by: MofoG23, Dec 15, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  14. MofoG23
    Post

    Replacing baffle insulation blanket, quad 4100i

    Yep, if its starting to fall apart, get it replaced. Very important part so the stove burns correctly....
    Post by: MofoG23, Dec 5, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  15. MofoG23
    Post

    Who starts fires with a torch instead of paper?

    torch user here. I use it with kindling and fire starters...
    Post by: MofoG23, Dec 3, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  16. MofoG23
    Post

    Insert blowing sparks out of heat holes

    How hot is your stove? Sounds like you are sucking in dust and blowing it over a very hot stove which then ignites the dust. I'm thinking you're...
    Post by: MofoG23, Dec 3, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  17. MofoG23
    Post

    longest non-cat burning stove

    My insert has a 2.4 cu ft firebox. Quad claims up to 12 hours burn time....I can get an easy 8-10 hours when using a good hardwood such as oak. When...
    Post by: MofoG23, Dec 2, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  18. MofoG23
    Post

    First overnight burn...am I paranoid?

    I grew up in a house with an old smoke dragon, so the concept was not new to me. I'm the type of person that if someone else installs or...
    Post by: MofoG23, Dec 1, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  19. MofoG23
    Post

    First overnight burn...am I paranoid?

    Nope, you're not paranoid. I did the same thing myself, not sleeping in front of the stove, but I did check on it throughout the night....and as BB...
    Post by: MofoG23, Dec 1, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  20. MofoG23
    Post

    For the EPA stove burners..

    Can't give an honest answer to the question as I have never run a cat stove. Having said that, I have been very pleased with our non cat EPA insert....
    Post by: MofoG23, Dec 1, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
Showing results 1 to 20 of 188 Next >
Search Again
Page 1 of 10