This is my favorite holiday to be around friends and family where we can all get together as the good Lord intended. Even though it's not that cold...
I was hoping someone could mention a method of cleaning baked on pitch and something to help free up rusty kinks from abused chainsaw chains. Was...
I have some seasoned pine and after reading some of the thoughts posted here regarding using it as shoulder fuel, I find a better use for it. In...
how do I pick which chainsaw to buy? I have a small cheezy 16" 32cc. "Craftsman" branded (McCulloch/ Poulan) chainsaw, but I need a "real" saw that...
Well guys, after the first season of burning in our new insert, it was time to do a clean out of the chim pipe. I bought one of those Gardus roto...
In the past our heating bill for natural gas hovered around $350 per month to just take the chill out of the air in order to heat this home during...
...♫ that nobody can deny♫♪[img] I have learned so much great information here on Hearth.com that I had to express my appreciation. Even...
I was curious if there is a benefit to having a thicker blanket inside the stove located at the top of the baffle plate ? currently have a half inch...
during an insert install is there a "rule of thumb" as to the insulation length around the 5ft. flex connection on top of an insert that the...
Not sure if you guys knew about this review however don't know if it's just an advertisement. It compares several flex liners for the DIY'er....
Can you guys offer advice how one guy can lower rigid pipe safely? I am concerned about how to hold it at the crown while each section gets riveted...
I am curious if anyone has given this much thought, regarding the different alloys and high temp durations. I am under the impression that sustained...
A sweep come out last week to clean my chimney before my insert gets installed however and as I look up into the smoke chamber I still see shiny...
Hi guys, back again for another question dealing with my upcoming insert install. I want to provide a block off plate at the damper area and have a...
It's 7:30 in the morning and I shouldn't be trying to use this much brain power this early but I have a technical question regarding offsets. I am...
I have an outside wall chimney some 25' and is a straight shot down a 12x12 clay flue (minus the smoke shelf, of course) I have on order a new 3...
Hi guys, I have many questions regarding this new install even though finding a wealth of information using the search function here on Hearth.com,...
Hey Guy, First of all a big thanks to all you guys who helped me choose the best way to go with what I have to work with. Being very limited to a...
Hello All, I began measuring my fireplace dimensions against my planned fireplace insert dimensions and found that I would have to cut a notch at...
Greetings all, I have owned a Quadrafire stove for the past 20 years. I am planning to install an 5100i insert so I thought it best to join the...
Separate names with a comma.
