I don't consider you being stubborn, just being helpful. I will measure, to the neutral wire, as soon as I can. I went to see the pellet stove...
Definetly will do that, as soon as the problem is corrected. Thank you all, for all your help, park4019.
I'll check with my local dealer, thanks park4019
Actually connected one wire to metal on the stove & other probe to the fuse holder, .2V.
When you said power surge; I remembered something. A few weeks before the initial failure, we had a thunder storm, in which we lost our computer...
I measured, as you said. I have 0 at the load side of the fuse holder, & accros the fuse. Pluged the cable into outlet, & .2v, at load side of...
The .2v , is on the load side of the fuse holder. I tested the outlet, & it has line voltage. I just sent a e-mail to a e-bay site that gfreek...
Just viewed that site, looks like it may be the way to go. Sent him a e-mail, with my problem & what i've done to diag it. Thank you very much...
I'll search for the new/old stock board first. Thanks park4019
I have line voltage at a empty fuse holder. Install a tested fuse in the holder, & voltage drops to .2volts. Fuse snaps tightly into the holder....
Tested the fuse with a ohms meter, showed continuity [0]. although my meter doesn't beep. Board doesn't smell burnt, now visual burnt spots....
The replacement fuse came from the P38, that replaced the problem stove. I have no ignitor, only two rotary switchs, on the panel; [blower & feed...
The fuse thats in the panel now is from the P38, [older spare unit] that is now running' in place of the problem stove. Both stoves had 4amp...
All three motors work fine, when independantly connected to line current. The fuse thats in the board, came from my spare P38, which worked fine,...
One of my older Harman P38's shut down; no warning. Replaced it with a spare, of the same make & vintage. I've never had any problems, with either...
I'm burning the same Maine wood pellets, in a Harman P38 & P43. `Got them at the local Lowes. Lots of ash, and oder in the house.[/quote]
My Harman P38, circa 2002 quietly shut down, didn't notice it until we smelt smoke. Replaced a blown 3A fuse, to no avail. Unit has power to the...
Separate names with a comma.
