hello curiously i wanted to try different fuels, so i bought a bag of the house coal smokey stuff, burned like hell very hot, very smokey blacked the...
I have not bought logs ever Ive always sourced my own, i am running low so thought i would give buying some a go. i contacted a supplier and he...
lovely put my new stove today im impressed [media]
hello all , i am wandering, i have a standard internal chimney with a 6 inch flue pipe traveling through it, so to gain heat in the bedrooms i am...
hello all , i have my stove burning from the top only , or should i say secondaries only no flames from the wood or not really and red coals, is...
wow i cleaned the flue pipe. the flue pipe travels up through a masonry chimney and ive never closed the top of it so there was a gap all the way...
just wandering if i install a oak what difference in heat will there be? what air does the stove remove from the room without one? is it worth the...
just a question regarding coal. if most the gasses off wood are burned in a modern stove so no smoke, then could the same not happen with smokey...
considering a new stove, the burley Wakerley 12kw [media] anyone had any experience of them? the questions i have is if they are so insulated then...
hello all. a question i have had in my mind. i was wandering. the old gas fires used ceramics to send the heat out, i wandered why they are not used...
hello all. come across loads of very large conifer trees today , been cut down some time, i managed a couple of van loads, very easy to cut. a sod to...
hello all. i have a stove with two vents at the bottom and three at the top. my understanding is the top vents are for secondary burn and airwash? i...
i have owned a china wood stove for 3 years now, and they seem to be frowned upon? i am curious as to why, what are the differences? spent a long...
hello all. i have a wood stove and i can reguate it so no air enters it, so pretty much airtight if i close it down totally. now a friend of mine...
i am building a conservatory and considerin a small stove in there , i have considered a chimney breat to allow flue pipe to travel through. i dont...
just wanderin regarding burning chipboard, after some readin on the bad about it i spoke with a kitchen firm about the chemichals used to make it and...
hello all the baffle plate is showin signs of bowing, its a cast iron plate i believe. i am considering using stainless steel for the next one? would...
hi new here not sure this is the right place to post, but here goes. I have a wood stove and a metal flue liner in the chimney, so far i have cut a...
Separate names with a comma.
