Would it still be any benefit to keep the thermovar (160 degree set point) just for the dhw, assuming i use mixing valves on the radiant loops? I am...
Zone valve would only be open when storage tank aqua stat read it was above its set temp of say 140 degrees
Thanks for the input. The blt is a controller that is sold by tarm. It is the controller that determines whether fossil fuel boiler fires or the...
I am in the process of building Tarm Innova 30 System from scratch and would like some input. I have made the attached piping diagram and I have two...
I think I have a simple question, please help me. Does a LK 810 Termover Loading Unit prevent ghost flows through a boiler when it is cold? I am...
If it is for a counter or table try waterlux original finish. I have used is it and it still looks good after 2 years. Can be recoat quickly and...
I am looking for suggestions for a brand primer to used on propane tank (that has been converted to hw storage)? The tanks have some rust/pitting...
Is it a bad idea to install a thermal safety switch (firotrol) on a wood boiler (innova 30)?...
I posted the wrong diagram, and in doing so realized that I can replaced the zone valve with a weighted check (and then use the zone valve they sent...
I just bought a tarm innova 30 and plan to have all the main piping as 1 1/4 inch dia copper as per the manufacturer diagram (attached). However the...
Separate names with a comma.
