The stove was purchased Feb 2012. I'll have the dealer replace it under warranty.
Mods, Please delete this duplicate. Sorry.
I cleaned my stove out today, and after cleaning out the fines trap, I noticed a glob of grease leaking from the auger motor. I am thinking a...
I am considering a hopper extension. How does it attached to the hopper? How does the lid switch extend to the new higher lid? Thanks, Jerold
The tile we used is montagna soratta from the home depot. Jerold
Thanks. I do have a surge/battery backup there pictured on the left side. I've moved it off the hearth as it gets rather hot that close to the...
I promised to post some pictures of my stove install. The hearth turned out better than I imagined. There is one regret, but overall, it will get...
Thanks for the help. I went with the 3/4 inch plywood with 1/2 inch hardie backer on top. The tile is laid out and only needed about 5 cut pieces....
I am referring to the corner joint that is created by the cement board cut and placed on the front of the heart. The wood has been covered with...
What kind of compound would I use to fill this angle created by the front notch of my corner hearth? Appreciate any suggestions or ideas. Harmon...
Smokey, Thank you for replying. I want to be certain that the pad I build is not going to come back and bite me on the ass down the road. I...
I am building a hearth pad for the P68 harman. I plan to use 3/4 inch plywood on top of 2 x 4 frame. 3/4 inch plywood on that, then 1/2 inch...
Welcome! Our P61 has served us well. 54% reduction of oil use! You will enjoy the P68. A real workhorse! Link to a thread of my pad construction....
Oops, I meant vertical run. I cannot go straight out the back of the stove due to wiring behind the wall.
Oh, they don't install outside air. "You don't need it unless your house has an air tight seal". Is it appropriate to use the combined thimble if...
Hello, I am new here and hope to get some feedback/suggestions on my hearth pad. Any feedback would be very appreciated. My wife and I are in the...
Separate names with a comma.
