Yeah, can't keep the stove running. And, yep, original dealer. I was surprised to be charged as well.
Thats what my husband is guessing is that it's a faulty board. Only a year old. Electrical covered for three years but still have to pay the $175...
Cleaned it, etc. did all of the above. Intermittently the feed motor light will shut off and won't come back on and the stove won't drop pellets...
The auger intermittently stops feeding the stove and therefore the stove burns what is left in the pot and then shuts down. You can hear the stove...
Actually, my husband is going to take it to a repair guy that will replace the bushing or the bearing and we'll keep it as a backup. Makes good...
No step by step photos but will do everything we can to pass along the good will. The site is a life saver! :-)
First off - thank you everyone for your help. It is definitely the bearing in the motor. Took it out, turned on the stove and greased it and my...
Additional question - if we buy a new distribution blower motor, does it include the fan, motor, housing, etc. or just the motor?
We took it all apart and you can see where the fan was rubbing against the housing. Lubed everything up, cleaned it up, put it back together and...
If it is the bearing then what? A new distribution motor? How expensive? Where to buy?
It's black housing with black cylindrical shape coming out.
So I retraced my steps, thought that maybe I inserted the probe wrong and started it back up without the panel on to see if I could hear where the...
We have a Harman p38 that we bought in 2007. Stopped blowing hot air yesterday, cleaned the esp probe today and was running fine. However, once the...
Will do. Thanks again for all your help.
It was filthy - cleaned it, fired up the stove and works as it should! Thank you!!!
Never mind - obviously it's going to look exactly like the part you're putting in. Sorry - no coffee yet when I replied.
Not to be a dope but can you tell me what it looks like on the panel or give me some direction as far as where to go to see what it looks like?...
Okay, everything cooled down, we ran a test and the distribution blower came on as it should during the test. I'm assuming based on what we've read...
We have a year old p38 and noticed tonight that where we had a flame, etc. there was no heat blowing from stove. The combustion blower is turning...
Our harman is only a year old and when we started tonight everything worked fine except no warm air blowing out. I gathered from what I read on the...
Separate names with a comma.
