Just finished our 215 gal. 201 SS tank that holds a PEX tube HX which consists of 300" of 1" well water supply and parallel 235' (total of 470') runs...
I'm installing the piping for a SS140 Wood Gun and wondering whether to use a manual or automatic mixing valve? If manual, can I get by with a ball...
We're rebuilding a manifold and considering steel vs. copper or PEX. The steel would be free. Copper is far from free. We have CPVC and it's been...
Does anyone know where I can find data on HDPE vs. PEX expansion rate information? We currently have HDPE on one run and it expands roughly 10" per...
Anyone use distilled or RO water to fill their boiler?
Does anyone use a non-pressurized, open carbon steel storage tank?? The Garn is basically that. I'm considering an open tank treated with chemicals...
I had asked what the worst smelling wood was........ What about the best? What wood makes you want to stay in the wood shed when your done...
I love the smell of balsam while walking through a Northern WI woods hunting grouse. I really like the smell of apple wood or hard maple. Hickory and...
Does anyone use cathodic protection on their boiler to increase the boiler life? Either passive or active system anodes??
Is there a general rule or suggestion for locating the backdraft damper? Is one required? For instance, right now I burn in a furnace and do not...
I've added up the volume of the tanks I'm considering and come up with 1700 gal. Total calculated btu with this is 159,000 btu. Is there such a...
Has anyone tried a concrete tank for storage?? They are used in both water and wastewater treatment plants all the time. Many of these outdoors...
Is there such a thing as wood that's too dry for the gas'r boilers??? I've read various ranges of acceptable moisture.
A few years back I saw a small stove that burned a single log vertically. The stove was loaded from the top. Has anyone run across this stove?
Separate names with a comma.
