You are absolutely right it creates creosote. I have a stainless steel liner in a interior masonry chimney and I clean it every two to three...
Ya, its great stuff. when I don't have anything else I can burn it green and it still puts out a lot of heat. I'll probably take some flack for that...
I'm not sure what the appliance adapter is. The reasons I had to make my own adapter was lack of room above the stove and the angle which the...
Look at the top most piece in my photo. The 6" stainless flue fits inside of the top ring. I did it that way so if anything drops down out of the...
The cast iron could work but you probably won't have much luck welding it. Yes ,10 inch diameter steel tube. The cut off is whats left...
You did a great job, that stove looks brand new. Hard to belive its the same stove.I going to try the Brasso. Did you have any broken parts...
It was such a tight fit I didn't use anything. The stove drafts well and I get very little creosote buildup. It should be sealed though. Yes...
why not just put a notch in the adapter. I did it and it works ok, no smoke or ash leakage.
My son is a sheet metal worker and is allowed to use his bosses shop. The top piece is 14 gauge steel that he ran thru a roller and then welded...
[ATTACH] Hi, I know this might be a little late but i just saw this post. I have the Lopi X and did what you are asking. When I installed the...
Separate names with a comma.
