turn your draft down to 3,if it still does it try 2...you might have to turn your feed up a little, i use 1.60 low and 4.00 high but i fine tune for...
there is a low feed rate for heat range one and high feed rate for heat range five and the computer chips vary it for the range in between
you can download a copy on usstove.com but this forum says tons more but i guess it has a few good things in it......good luck
how high was your high setting
notice the extra piece that fits in the groove of the front of the pot.... allof the welds are on the outside so it fits the burnpot tight. i...
here are some pics of burnpot mod which i suggest works good and increases air flow so i can run on one lower draft setting and can go a week and a...
you should read the "king 5510 review" forum for alot more info on these stoves
i got a us stove king 5510 , 7 weeks , 1.25 tons later, so far so good
hey darren,you mentioned running on heat range 5, just so you get a rough idea, it was 7 degrees this morning and on heat range 3 my house was 70...
hey darren iforgot to mention on the other forum i answered you in is that an ideal burn looks like one layer or just over of pellets on the bottem...
darrenhunt, there is upper and lower auger and draft setting , factory auger is 1.75 low and 4.50 high,i use mine at 1.60 and 4.00,,,,,, the draft i...
smokes a little till it comes up to operating temp and can burn clean, this is normal as long as it is only for a min or two
i started my changes and improvements based on info from everyone, i have designed a burnpot chute that not only funnels the stray hopping pellets,...
well, heating season is upon us again, i am scott, proud new owner of the 5510, this forum is great and all of you that have shared the info that has...
Separate names with a comma.
