Forced air in house radiant in shop
I have a vigas 60 sitting in my shop hooked to nothing. Plan to have it fired next fall. Just trying to decide on either two 500 gal tanks or two...
Here we go again. -30 and furnace isn't firing until 2nd or 3rd try. Only when it's super cold. Thought it might be propane issue but why when I rap...
The tank is new too and when the guys filled it they purged it with methanol. Maybe the line between the tank and house "200' " had some moisture in...
Yes drip leg is installed. Seems to be running alright now but the -30 weather has gone also.
That's awesome. I have a 60 sitting in my shop hooked to nothing. Hopefully get it fired by next fall.
Brand new ruud 90000 converted to propane. -30 outside started shutting down right after burners light. Tap valve and it goes. Took out red spring...
I just sent a bank draft to a dealer in southern Ontario for the purchase of a Vigas 60. should get it in the next few weeks. I'm excited and nervous...
Once I get my tank for water storage i was thinking of taking it to the local shop in town to have it steam cleaned if it's not going to cost too...
the tank will be horizontal.
I just scooped up a 1000 gal LP tank nearly free of charge which I plan to use for water storage. I hope to get it home this wknd. Not sure of the...
I get so close to purchasing a boiler and then i'm not sure if it's the right one. I need a 60k boiler. i will have 1000gal storage. the more i read...
Does anyone have any put on the biomass combo boilers. That's what I'm thinking of getting. Good , bad.....?
If I put 180' of 1/2" pex under the footings before I pour will that work for an overheat protection dump zone? I haven't poured addition on shop for...
I will have 1000 gal pressurized storage right next to boiler in shop piped with 1.5" black iron then supply house with 1" thermopex. Hopefully that...
I am on the hunt for storage now. I'm pretty sure I can get used lp tanks but how do I clean them??
Yes I have 2" of rid god foam under the entire slab. I have not done around the outside yet by will before I landscape
Thanks Jim. Is there a site or somewhere I can go to help me figure out the sizing stuff. What type of a tank do you have? Are you happy with the...
I forgot to mention a few details. I want to heat the house with a rad in the existing f/a system , the hot water , and possibly a floor zone in...
I have just built a shop 32 x 48 well insulated with 7 - 1/2" pex floor zones. It is 150' from my house. (Approx 2500sq') today I just buried the...
Separate names with a comma.