Any one you want to check :)
Nice link. Open the pdf on the page. www.uwsp.edu/cnr/leaf/treeid.htm
I placed my thermometer above the door opening, left side (2400i). The blower makes it drop close to 175 deg. So just keep in mind that if your...
Just picked up two truck loads of full rounds that are 22" to 24" long. The max size I can fit is 20" and that is just a bit to long. Should I cut...
I have a Regency i2400 and the blower on high does not sound bad at all. I do work in a large printing house so I'm half deaf anyway. With the blower...
That a nice box .We use a plastic Tupperware box with a lid. I'm sure my wife would like yours much better. Mike that made me LOL :0
A buddy from work hooked me up with this 12volt dc fan. He hooked up the fan to a thermostat so you can set it and forget it. As the temp gets to say...
Yes it is the Regency 2400 and I love it. Better yet my wife loves it more. It was 135 bucks for the permits OUCH. I know I should not have burned...
Installed on Dec 23rd. First inspector out was the Fire Marshal. He said wow that’s neat. How do you open it? I told him turn the handle clockwise....
If I can remember the Farmers Almanac says that the average temp does not fluctuate more than 2 degrees the entire season. So expect a very cold Feb...
I'm able to twist and unlock the top section although I will have a full flex re-line inside of that. I don't want to keep bending that around. So I...
All good points. The sweeps in this area want close to 200 to do the job (Due to the height of the stack). I’m sure I can keep calling around. I’m...
But will the fiberglass rods make that bend? And since the door will be opened how do you not make a mess? If I turn my wifes living room black she...
I have a steep roof with a tall 9' metal stack. The only way to get to the top of the chimney would be some type of scaffolding. Is there anyway to...
My regency 2400 insert is due early next week and I’m told will be installed next week. No I don’t believe it but anyway I found time to go to the...
I will need a 12x48” hearth extension to meet the code requirements. Can the pre-fabed extensions lie on top of carpeting or will I have to cut away...
I have a very small 1/8" to less than a 1/4" gap. Can I just use High temp silicone to seal it. Can not see any wood looking up thru the crack but...
Warren nice pics and nice job. I definitely will have the 12” from the top of the stove to the bottom of the trim. Oh by the way, in my town you...
Unfortunately I agree with the installer part. Ordered the stove and everything was fine. Then as I learned a bit more and asked Questions and the...
Hi, I’m ready to install a Regency 2400 insert. The only problem I think I have is the clearance to the top facing. It needs to be 12”. I will have...
Separate names with a comma.
