This question may be moot, but do any or have any of you guys out there measured the temperatures inside the operating pellet vent? I have a short...
My Son-In-Law has been offered to buy a 3 year old Woodmaster 5500 with some of the attached appurtenances and a honda powered Troy Bilt wood...
I took this advice from both the forum(s) and my plumber brother that I could use black iron rather than copper, (next to silver and gold on...
This may be one of the dumbest ideas I’ve come up with, but I’d like to cut and split beech and air dry it under cover to as near to 20% MC as I can...
Have a W-R 3 wire zone valve that supplies all the heated water to the 1150 sq. ft. main floor. It's connected through a Taco ZVC 406 and I just...
Just had a "first fire" this past Monday in my new PB 105 and have burned 5 bags of Currans. I have a question for PB owners and other Harman owners...
It's the weekend and my dealer is closed til Monday! Have been working alone to DIY my conversion from cordwood hot air to hot water and today was...
I've read quite of few threads from the forum's contributors, but can't remember seeing a mention of pressures in piping created by circ pumps....
Finally got enough help to put the Harman in the cellar. Took some work just to get the old wood, oil, coal hot air combo and ducts all out. Next...
Plan to install single runs of 7/8" PEX between solid floor joists in older home. I mapped the runs all out, located the manifolds, counted number...
I've been reading and learning from all of your discussions and ideas out there in the forum and have "bit the bullet" and have started collecting...
Hi All, Want to thank all contributors, especially in the Boiler Room, for your answers to the many questions on boiler installations, requirements,...
Am installing new PB 105 and the instructions say not to install the venting in a chimney over a certain length according to a table in the manual....
I'm new at this "boiler business", but willing to learn. Don't want the learning to cost an arm and a leg. I've been reading and learning here on...
Separate names with a comma.
