I couldn't find a Harman stove in Pink... :)
Keep in mind the laws of thermodynamics are at work also.. The larger the temperature differential between outside and inside will result in heat...
You can halt the auger motor by opening the hopper lid to trip the vacuum switch, during startup the igniter stays on in this state. You can control...
Seems to be narrowing down to just a couple of possibilities. I reckon that since it's the start of a new season you might be using older pellets...
Ok, been thinking about this a bit more... If we discount a possible igniter problem... You mentioned a higher draft reading in the burn chamber -...
There is a low draft pot adjustment screw to the right of the igniter LED which you could tinker with. However, I don't think this is your ignition...
I wanted to try Barefoots, so I picked up 4 tons during a spring special for $238/ton (plus delivery) from SOS Stove in Port Murray, NJ. I test...
Yea - If I simply drop a cotton ball on the floor my wife will run to Macy's... gets darn expensive after a while...
I have yet to try Barefoot, but based on the recommendations here I just ordered 4 tons. Luckily the local dealer mentioned a new price - $235/ton...
Propane here is being quoted at 3.69/gallon, I normally use about 2000 gallons/year so would have cost $7,380 Pellets on average were $240/ton, used...
Franks - I agree - now I call my generator purchase "Power Outage Insurance". Almost never have to file a "claim" since I installed it.
My Harman dealer installed my PF100 in the middle of October. I tried to get someone to do the ductwork, but either they didn't follow up or they...
I ordered a PF100 in early June, the single revised delivery date was September 29. Came in within a week of that date. I was expecting the date to...
If I remember correctly, programmable setback thermostats were reported to make the most improvement in climates where the temperature differential...
when.... You have 18 tons of pellets stacked everywhere and your stove won't be in until August 2010... Hail
So, let's see... If I wait four months to buy a hat, then I'll be able to call whoever bought more than me a "Hat Pig" ! Hail
Your post came in at a handy time.. Just had my PF100 installed and waiting for ductwork to be installed. It was much easier to seal that space with...
Separate names with a comma.