thanks Smokey the Bear...I will be cleaning the stove today and will check the connection on the esp. I have never checked for a loose esp...
thanks all for the quick response...I did a cleaning of the entire exhaust, fines, flue, and esp a month ago...the Accenture is not the insert. I am...
Has anyone had the experience with a Harmon Accenture that will overfeed pellets? I have to turn the pellet feed setting to 2 in order to stop...
I appreciate your interest and comments. What I am calling clinkers more than likely are carbon deposits as I use a screwdriver to wedge them of...
Definitely not carbon buildup. I clean the stove burnpot weekly making sure there are no clinkers. I am wondering if the control panel has...
First piece is still holding fine...it has also stopped the pieces from falling out the back side of the burnpot....many thanks
I tried the idea and it seems to be working (only day 2 however)..I am wondering if I followed your directions correctly. When I first tried I...
thanks for the information and esp the part number
Frankie thank you for the directions and will give it a try and let you know.
I have a Harmon Accentra...thanks for the quick responses. I clean the groves removing all carbon buildup and have moved my feed rate down to 2. I...
My Harman flame guide gets lifted by the pellets and pushed at an angle that leaves the guide dangling off the front of the burn pot. This occurs...
Thanks again for the responses and let me try to clarify. The vent leading from the house was less than 18 inches from a window which could be...
thanks for the feedback. I called another Harman dealer who came right to the house and serviced the stove. My original complaint to the dealer who...
I have had great luck for with my Harman Accenture for the past 8 years replacing an auger and convectiion blower. The stove runs but blows low heat,...
Separate names with a comma.
