I don't have storage. One thing that I found helpful was to put a piece of an old fireplace grate over the nozzle, three or four bars or so. I rarely...
That 18 percent sounds about right. Mine wood was 9-11, so I threw a few pieces in that were 23, at least according to the meter...
One other little trick with the biomass I've learned. If you load or poke at the fire frequently and want to avoid that little puff of the smoke that...
For anyone interested... I had quite a problem with steam coming out of my 28 foot cinder block and clay flue chimney. The chimney is 8 inch. I was...
I talked to Zenon at New Horizon, he said don't worry about the insulation, just pry it off and you can replace it with silicone? Something like...
Thanks for all your help, q-bull. It's finally cold here in CT, 14 degrees. The house is 70 so I'm not complaining. Just the same, I think I'll call...
I have the same problem with the by pass, often have to push it from inside with something due to creosote. It's very had for me to get bed of coals...
Thank you, Burning Chunk. I just got back home and put those settings on the primary and secondary. I have a good white flame below but a lot of...
I'm actually just running out the door but yes, I climbed up on the roof (very high) like an idiot just to make sure, had yellow flame at the time...
I've got a biomass 25, I've messed around with secondary and primary openings, fan settings and pump settings. I've got dry wood, even used some old...
Separate names with a comma.
