I tried a search and couldn't locate anything on it. Last night I started hearing an odd noise coming from the combustion motor (I took the back off...
I have been burning pellets for about 6 years now and have probably burned most type pellets available in my area (southern NH). I had just finished...
I know I have asked a few ignitor questions but I am trying to understand the process. My ignitor will sometimes work and other times not. My burn...
Anyone know of reasons that the stove will stop feeding other than the pellets being too long? I have a Harmon XXV that will consistently shut down...
I have a 5 year old XXV that has the original ignitor that seems to be working off and on. I have found that if I allow the ignitor to hang from the...
I am getting the "5" blink status. I have cleaned the burn pot very well and wiped the ESP probe. I can feel heat inside burn pot but the pellets...
with all the trouble with ignitors I figured I better start looking for one. Any idea what specs are for a Harmon XXV with a manufacture date of...
A local dealer is selling Michigan hardwood pellets and Lakes Region softwood. Any opinions on either one, or softwood vs hardwood.
Is there a way to get at the ESP from the front or do you have to disconnect the pipe from the back?
Caryn's Convenience on Route 13 in Brookline, NH is selling them for $275/ton and they have several on the property in dry storage.
I am switching locations of a Harmon XXV and a US Stove. The XXV exhaust pipe is about 3 1/2" lower than the US Stove. Any idea on a flexible pipe...
I don't know much about the pellets but on June 13th from 1 to 5 pm the following company will be having an open house and selling pellets for...
The US Stove is a pretty basic stove (no tstat, no auto ignite) NOISE: the stove in general is pretty loud; the air coming through the top of the...
I have a Harmon XXV in one side of the house and a US Stove American Harvester in the other (bad, bad, bad idea to have both these stoves in the same...
My XXV top surface is hotter than ever before and smells of a new buring odor (probably paint). Distribution blower does not seem to change speeds...
-Before the burning season I did what I thought was a good cleaning of the inside and back of the stove (did not remove motors, only cleaned around...
Is a fresh air kit mandatory for the stove to run?
Any one have any ideas on the best settings for the Harmon XXV (ie: feed rate, temp.) for better eficiency? Right now I keep the temp right around...
I am confused about the "Gold Warranty by Harmon." I will first say that I own a Harmon XXV that I am for the most part happy with. I also...
I have a Harmon XXV that is less than a year old. It regularly fails to ignite and gives the "5 flash" status at which point I turn it off and then...
Separate names with a comma.
