I currently have b/b hyrdronic and would like to take advantage of lower boiler/storage (~500 gal.) water temps to heat my house. I'm thinking of...
A friend of mine was giving away a Weider exercise machine and asked me if I wanted it. I said sure I'll take it. I put it about 5 feet from the...
The "leaky gasket" thread reminded me of something. When I took the top door off of my Eburn 150 the pins on the hinges were well worn. I put some...
Someone had suggested that I post my layout for reference purposes. It's not exact, but it's as close as I can do with MS Paint. It's kind of a...
I'm showing a switch power of 27 volts AC that I want to use to trip one of my 110 volt circs on. I thought it was odd that it is ac and not dc?...
After looking @ Nofossil's Simplest Pressurized Storage.....I'm thinking that my Econoburn's 2 circ setup is not going to work with that layout as...
I have time and a little money to clean up some of my problems/shortcomings with my system and would like to improve the automation of the system....
I'm sure it's similar on some of the other manufacturer's units also. Piker had me adjust mine as it was out of spec. I don't understand what that...
I thought it would be good to check my Econoburn's chimney for creosote, so I pulled off the cap attached to the tee on the back of the boiler. I...
I would like to know what people are using for expansion tanks on their boiler systems with storage. I've got about 560-600 gallons total system...
I have the system mentioned in my signature. Below is a picture of it....if I did it correctly. My system keeps building pressure, sometimes up to...
My brother-in-law is attempting to install radiant floor heat in his new home.....he asked me (like I'd know) how he is supposed to bend the 1/2"...
I was able to figure out how to turn my gas boiler down to 140 deg so that it doesn't kick on unless the incoming water from the wood boiler gets...
I had a Taco 007 as my main circulator. The motor was hotter than the water running through it so I changed it out thinking that the motor must be...
I have an aquastat on the output of my Econoburn 150 that shuts the fan off if the output temp gets too warm. I was wondering what that aquastat...
Just got off the phone with Dale @ Econoburn (Dunkirk Metal Products). Even though I bought my Econoburn second-hand, he took time to answer the...
1. I pulled the elecitrical box open on the back of my Econoburn 150 and am a bit confused. There are 3 white wires coming out of the main...
It would seem that I'm not supposed to be able to live without one. I'm looking in the 800-1000 gallon range. The only thing I can think of is...
I apologize up front...but I'm probably going to be asking a ton of questions. I just got a quote to install my Econoburn 150 into my existing gas...
I've just purchased a used (less than a year old) Econoburn 150 and am currently in the process of installing it. Several questions.....I've got a...
Separate names with a comma.
