I have been having a problem with my Kerr wood boiler since I installed it two years ago. It doesn't happen very often, maybe once or twice a week....
We are looking at temps here in the range of 3 to 7 degrees celsius (37-44 degress farenheit)for the next week or so, so I'm thinking its time to...
Saw this today and thought it was pretty neat, cost effective way of stacking wood for customers. Question is, as a customer, would you be willing...
I have a Kerr TW2000 connected to my oil boiler in an in-series arrangement as shown in the attached diagram. The boilers heat three floors with a...
I just got a huge load of milled beech wood cut in 10"x10" blocks that I am cutting into 25"long sticks. I am going to split some as well. They...
Well, after asking many questions in this forum and getting great feeback, I finally have a new conventional wood boiler up and running. It is a...
I have a Slant/Fin Oil Boiler with a Honeywell L8124L Aquastat which heats 4 zones (cast iron rads) and an indirect hot water tank. I just installed...
I am wiring in an Honeywell RA89A Relay to shutdown my oil burner whenever my wood boiler's circulator is running--- as seen in the first attached...
My wood boiler is all connected and working great. However, I have a problem with my oil boiler. I originally thought that as long as my oil boiler...
I need to wire my mormally open zone valve into the triple aquastat on the oil boiler (per diagram attached). This allows the oil boiler aquastat to...
My new indoor boiler is located some 50 feet away from my oil boiler and the system zone valves. So the hot water must travel through 50 feet of 1...
My house is plumbed using Wirsbro 1/2" pex to all cast iron rads from the oil boiler. The new wood boiler is plumbed to the oil boiler through...
I am installing a Kerr TW 2000 wood boiler into my existing system (oil boiler- baseboard-cast iron rads). There is currently no mixing valve used...
I am installing a Kerr TW2000 Highlander indoor wood boiler. It comes with all the parts required to install what Kerr calls a Blow-down...
I am installing a Kerr TW2000 wood bolier into an existing oil- hot water system. The current system is made up of a Slant/Fin oil boiler with an...
I'm looking at piping an indoor wood boiler to my oil boiler and also to my dump zone in either copper or black iron pipe. It looks like ill be...
I currently have a Slant/Fin oil boiler installed in one side of my basement. It has 5 zones, one for indirect hot water tank, one for garage using...
Hello everyone, really enjoy this forum. Lot of good information. I was wondering if you could help me out with my current heating situation. I'll...
Separate names with a comma.