I've had an air scoop connected to the boiler for many years now. Not sure I have been using it correctly though. I have always kept the bleed cap...
I just purchased a number of used cast iron radiators that I will use to migrate from forced air to all hydronic. I have completed a heat loss...
For those of you who have an EKO 40, could you let me know whether or not the two metal secondary ports are tack welded to the front frame. Mine are...
I'm curious to see how high others are setting their boiler output temperatures. Indicate whether or not you have storage. If so what...
Is rain water good to use in a wood boiler system with storage? If it's good, why? or wood if it's bad, why?
I have a Primary/Secondary configuration. The primary loop is about 20 feet of 1 1/4" B.P. with fittings,powered by continuous running Taco 007...
How do you think this would work for expansion serving 1000 gallon pressurized storage? I will use two salvaged 50 gallon HW tanks. The sight window...
Has anyone had any success in finding a source for used propane tanks here in Ontario. I thought I had a source lined up in Belleville, however all...
Success at Last! Attempted my third burn last night after two other attempts that failed to provide much heat or gasification. The first attempt...
Can anyone explain how to calculate the total head loss in parallel loops? For example I have 3 X 250 foot loops of 1/2" pex=al=pex. If X = the...
I've being putting this together in my spare time over the last couple of months. Thought I'd post the schematic for anyone who is interested to take...
For those of you who have EKO boilers, how did you resolve the issue of going from British threads on the input/output 2 inch pipe to NPT threads?...
I am planning on using copper coils placed vertically in the storage tank for heat exchangers. I want to use the same coils for both heat input and...
Received our EKO 40 boiler last week. Managed to get it safely positioned in the outside boiler house and remove the steel shipping pallet . It's...
The chimney graph chart in the EKO users manual indicates that for the EKO 40 with an 8" chimney a 30 foot chimney is required to provide adequate...
Separate names with a comma.
