I am planning to build a structure 26' by 36' to be called a garage/storage and later be turned into an apartment in the woods. I plan to make as the...
I am considering the building of a small house/cabin that has in the center a block/brick hollow column with a inside dimension of about 3 by 6 feet....
When I built my house 14 years ago, I installed a Single unit that has a 100BTU furnace and Airconditioning unit in one rectangular package with all...
I have always bought Poulan chain saws, at least 4 or 5 in last several years. Maybe no more. The 4018 I have now is about two years old and the gas...
High efficiency propane furnaces as I understand it are so efficient that they have only a pvc chimney pipe as the heat out the stack is very low....
Just finished final touches on my installation. I made all the ducting by welding up angle iron and covering with 22ga sheet using pop rivets. The...
Here is two photo's of my recent installation. I have yet to put in the fresh air supply but otherwise it is done. I made all the ductwork by welding...
I just installed Big jack furnace and will we using soon. I have a lot of wood that I cut 2 to 4 years ago and stacked outside uncovered. It is...
I have finally got my furnace installed and will be firing up soon. I did the installation myself and have only the thermostat and fresh air vent...
I am planning to install a England 13NC free standing stove on a 3/4 inch oak over 3/4 plywood floor. The manual calls for a R value 2 hearth minium...
I am new to forum and this is my first post. I tried a search of this topic. I have been looking at several ways to add wood heat to my house and...
Separate names with a comma.
