If it sells and you get what you want for it, maybe you can get yourself a free standing stove. less work then building a chimmney. You won't have...
Yes I have the black ESP wire so i got that switch #5 on off, when I first put board in it was in on position and everything ran wouldn"t turn off. I...
I had posted previous about my problems and having to change out the circuit board. This board seems to run a little different. She runs fine, except...
Want to thank everyone for there help ! Put the board in last week, plugged it in and everything came on, turned to off and everything still was...
I pulled the stove out disconnected everything, put in new fuse. plugged it in and pop. I guess it must be the board if everything is disconnected...
Thanks for all the feedback haven't had time to play with it yet, I will probabaly be frezzing my azz off by the time I get to it. If I disconnect...
I have a Harman Invincible Insert from mid 90's. The stove took a power surge from the generator, burning something out ! I only have looked at the...
When I pulled the combustion blower out to change it some of the fan blades seem to be extended out. I am not sure if they were meant to be extended....
Hello, yes thanks again for your help. When the wether gets a little warmer here I will shut my stove down and try to get it figured out. I will try...
Yes I just did that last month to change the combustion blower on my Invincible Insert with the 2X4's. When I had it slid out I had about 8 inches...
I need to get under mine come this spring. I was thinking to slide it out and when I have it out enough try to prop it up and lean it back a bit....
Yes , Thank You guys for the help. I think that the ESP is getting to hot and shutting down the distribution blower. I never had this problem until I...
I have an older Harman Invincible insert just changed the combustion blower last month. Now my distribution blower is running and not running. The...
Separate names with a comma.
