I did the same thing with the 46cc Poulan I bought years ago. I think the chain stretches pretty bad when you first use the saw. I straightened my...
Would it be possible to build two racks each holding 4 panels? Each rack could be mounted on the south wall using a hinge on the top edge of each...
Yep, and now the NYT is closing their environment desk. Maybe they know we'll never survive a large arctic methane release and the environment...
I'd bet that 100 years of gas is like nuclear fission generated electricity being too cheap to meter. Iraq had weapons of mass destruction too....
Interesting! It looks like you should have extended your roof a little farther out to shade the glazing during the summer when the sun angle is...
Try running a little kerosene through the oil reservoir. It got my poulan (that's as old as yours and very similar, PP4620AVL) oiling the chain...
I noticed something this week. I collected some oak rounds that were cut last spring and some were cut a little over a year ago. Three weeks ago I...
Here's some of mine. It's all red cedar, crab apple, hackberry, maple, and black cherry; whatever I can scrounge out of my yard and areas nearby....
Hilarious! Thanks for the laugh! :-)
I'd look for a cheap saw on ebay or craigslist to use for repair parts. You also could buy another saw just like it and use your present saw for...
Funny, I used to have trouble finding a heavy duty carpenter's belt that was small enough to fit me. I'd go to the store and tighten them all the...
Why delete my posts when you'll allow someone to peddle ignorance like this? People don't need to be given such erroneous information. "Starting...
Thanks for the link. The last time I saw it posted there was no station within 20 miles of me. Now the list has changed and the second to the...
It's 46cc's, so I'm just under 3cc per inch if I go to a 16" bar. I figured about 50cc was the minimum I'd be satisfied with. I've had it about 5...
That's funny! Being a carpenter I'd like to get a big saw, monster bar, and mill. I'd hate to see how lousy the saw I've got would do with a 24"...
I've got a Poulan Pro PP4620AVL (no need to laugh, I'm poor and it was inexpensive) with a 20" bar that Oregon's website says uses a .325 pitch, .050...
lol, I did it just a few days ago. I had to come down the ladder to figure out what the problem was. I had left the saw disassembled after cleaning...
Ropes are cheap.
"I just grab hold of the BOTTOM of the cap, one hand on either side and pull up with a side to side rocking motion. It is a tight fit so go slow and...
I think I may have messed up. I connected a chimney cap from a Dura-Vent DuraPlus basic chimney kit to a 36" section Dura-Vent DuraPlus SS chimney...
Separate names with a comma.
