Update Snap disk 1 changed Stove turns on and seems to be running fine until shutdown. After fire goes out and stove cools, blower goes off but...
Ok. Here is what I did so far. In another thread I was advised to change snap disk 1. Facing the stove I opened the left side panel and saw the disk...
We've used the stove all last year and it never did this. Thus my concern. The fire goes out,the stove begins to cool and then the blower shuts off...
Well that didn't solve my problem then. Blower turns on and off at least 5 times when stove is shutting down and two to three times when it's...
I know that but is it on the left side right behind the left panel or in the back of the stove Thanks
I need to replace snap disk 1. Is this disk the one when I open the left side panel where the purple wires are connected. It sure looks like it but...
Thanks. You guys are the best
Stove has been acting strange. It fires up with no problems and when it reaches temperature the blower comes on. However, after about a minute of...
Hey buddy. I had the same problem with my quad recently. The system was short cycling. Pellets kept dropping before the flame was lit and when...
That's interesting....as far as I know, the swing settings are only whole numbers like 1,2,3,4, etc. But to answer your question, yes, you're...
That stat has a swing of 2.25. so if i set the stat at 70 it will heat to 72.5 and then not turn on again until the temp drops to 67.5. Is this...
I agree w/ BeGreen about the Lux stats...this is a particularly nice one: www.amazon.com/Lux-TX1500E-Smart-Programmable-Thermostat/dp/B00099HERE...
Thank you very much. I appreciate your response. I picked up a lux at Lowe's. It's a tx500. Hope that one is ok, that is the only programmable...
I bought a house with a Quadrafire Classic Bay 1200 insert. The stove seems to be short cycling. The stat calls for more heat when stove blower is...
Separate names with a comma.
