These darn bushes with red berries are taking over.
the Ash trees are dead and it doesn't take long for these bushes to take over. mowing the fields...
First thing I would do is move the splitter to the shade then hunt bucket and something to drink.
This is a dead standing tree with no leaves and I'm not very good with bark ID.
What is it?
Better turn that birch upside down and let the water run out.
Seems like the humidity level is a little lower than usual here. We have a dead crunchy yard here also 13" shy of normal rainfall for the year....
I have noticed a lot of big black ants in some of the dead wood on this property.
Thanks for the information. I've never had to deal with a tree with termites. Hope they don't go to another tree.
Don't know why i didn't think about termites. Is there a way to kill the termites before dragging this thing home for firewood?
I found this tree in my woods today DEAD! I believe it is a pignut or bitternut hickory. Looking at the base of the tree it looks like sawdust is...
Try a 7018ac rod. 3/32 set at 85 amps. Play around with the amperage some welders vary. A wire brush on a grinder helps knock off the old paint.
One good thing is a lot of the bad or weak trees will be clear of the power lines now. We went through a f4 tornado here and I know what you are...
I never have converted psi to tons on a cylinder
I've run a few 2 stage hydraulics and I think Kinetic splitters will easily win. Of course you don't have to do a full cycle on hydraulic cutting...
I believe they replaced the rack, not sure what else.
We were diong a 2 man operation when I first got it. I was lifting the rounds and my 17...
By the way splitting wood and it was 108 degrees in Southern IL. Thats Nuts!
I bought a SpeedPro splitter about 3 weeks ago. Tractor Supply had 4 of these things that SpeedPro finally did the mods to. They were marked $1499...
Will this be enough?[/quote][/quote]
That the best kind.
Put them beside the wood stove and watch the yeast go to work.
I am running mine the same as yours. It said in the directions that the polarity was reversible so I have mine wired as #1 is the neutral #2 is...
Separate names with a comma.