Esersky's Hardware in Clairmont NH is the charm. Same prices as Stove Parts Plus, (the only place with actual web ordering ability!) and I can just...
Thanks all!! I'll check them all out...
I’m here to tell you, when your wife leaves the ash door open and the flue temp goes up to over 1100 degrees, things do start to warp and crack. That...
I'm here to tell you, when your wife leaves the ash door open and the flue temp goes up to over 1100 degrees, things do start to warp and crack. That...
bht: we'll be using baseboard. I have to say the Econoburn does look like a very impressive unit, although I have yet to see one in person. Or to get...
Eric, thanks for the tip on the powervent, and I agree with you about having all your eggs in one basket... seems like since I have the option it...
I've been looking into a wood boiler for our 2000 sq. ft. fairly well insulated house, so I was very interested in the discussion involving the...
Yeah, stove is not sitting where it is used. And by the way, I'm wondering why nobody thought to tell me the burning odor was because of the tape...
Well, so far, so good. I opened it up again and looked at the seams in the bottom--ALL of the sealant was compromised and flaked off when I started...
Using an internal probe thermometer approximately two feet up flue. Stove seems to be firing more quickly than before cleaning, there did seem to be...
We have a Jotul 3, an older model with the catalytic converter. Directions state to get flue temp up to at least 600 degrees before engaging...
Separate names with a comma.
