1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 6
  1. olddawgsrule
    Post

    Pressed wood/logs

    Finally my TSC got there load in. I've been there with bricks and get the idea, but blocks are what I'm interested in learning about. Fuel Block is...
    Post by: olddawgsrule, Oct 28, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  2. olddawgsrule
    Post

    Pressed wood/logs

    @HP I see from you post or should I say read the underlining as; You're preferring bricks over blocks. I'm seeing the logic in this so far with...
    Post by: olddawgsrule, Oct 18, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  3. olddawgsrule
    Post

    Pressed wood/logs

    My mistake, you have it correct, it's Eco not Bio that TS carries. I will re-confirm once they get some in. Am very interested in your...
    Post by: olddawgsrule, Oct 18, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  4. olddawgsrule
    Post

    Pressed wood/logs

    Thank you folks for updating this thread! So far I've only tried the CanWick bricks and hope to try some Bio-Blocks soon. My first impression is:...
    Post by: olddawgsrule, Oct 17, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  5. olddawgsrule
    Post

    Pressed wood/logs

    I'm a bit lite on cord wood this year.. only 1.5 cord in the shed.. Need 2.5 cord there. I'm heading back towards using some bricks or blocks this...
    Post by: olddawgsrule, Oct 14, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  6. olddawgsrule
    Post

    Pressed wood/logs

    I have to ask: Where did you get your EnviBlocks? I can't find a local supplier in South NH
    Post by: olddawgsrule, Oct 14, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  7. olddawgsrule
    Thread

    New England (MA, CT, ME, NH, VT, RI) Hooksett, NH

    Stopped by Hooksett HD today for some other goodies and saw several (like 20+ pallets) of Firesides for $209 outside. I personally like Firesides!...
    Thread by: olddawgsrule, Sep 8, 2012, 0 replies, in forum: Wood Pellet Pricing Reports
  8. olddawgsrule
    Post

    Question on my UPS

    I popped over to the site Slow1 recommended and they confirmed my understanding. It will reduce production, but it looks like not all the way to...
    Post by: olddawgsrule, Nov 18, 2011 in forum: The Green Room
  9. olddawgsrule
    Post

    Question on my UPS

    You have the fuse setup between the charge controller and the battery? Or between the panels and the charge controller? I'm setting up a control...
    Post by: olddawgsrule, Nov 18, 2011 in forum: The Green Room
  10. olddawgsrule
    Post

    Question on my UPS

    I need to thank you once again for the suggestion. The site is as good as this one. Fast response from knowledgeable folks! I will also recommend...
    Post by: olddawgsrule, Nov 18, 2011 in forum: The Green Room
  11. olddawgsrule
    Post

    Question on my UPS

    Panels and batteries are wire in parallel to increase amp and hold voltage. Panels are not diode protected, but the charge controller is. The...
    Post by: olddawgsrule, Nov 18, 2011 in forum: The Green Room
  12. olddawgsrule
    Post

    Question on my UPS

    I will check them out.
    Post by: olddawgsrule, Nov 18, 2011 in forum: The Green Room
  13. olddawgsrule
    Post

    Question on my UPS

    Have the first of the 3 panels repaired! It was the solder joint (from the factory) that failed. Thank you all for your assistance. Ya, I have yet...
    Post by: olddawgsrule, Nov 17, 2011 in forum: The Green Room
  14. olddawgsrule
    Post

    Question on my UPS

    The 17Ga is gonna be sturdier - BUT - 17GA is much more stiff and can put pressure on whatever you are soldering to. If this is something like a...
    Post by: olddawgsrule, Nov 16, 2011 in forum: The Green Room
  15. olddawgsrule
    Post

    Question on my UPS

    Forgot to ask... Stay with the 23g off the panel or up to the 17g wire? Short distance for these panels, 15 feet.
    Post by: olddawgsrule, Nov 16, 2011 in forum: The Green Room
  16. olddawgsrule
    Post

    Question on my UPS

    Nope - that will probably be between 35-60 watts (depending on model/make). It really should be all that you need. You using flux?? If not, you...
    Post by: olddawgsrule, Nov 16, 2011 in forum: The Green Room
  17. olddawgsrule
    Post

    Question on my UPS

    Just wondering if you iron is the type that is shaped like a gun?? If so, be very careful, you can overheat anything that is sensitive pretty...
    Post by: olddawgsrule, Nov 16, 2011 in forum: The Green Room
  18. olddawgsrule
    Post

    Question on my UPS

    Just dissected the first bad panel. 23g wire on it. My other project panels I was trying to solder 17g wire it them. My theory was, if I'm...
    Post by: olddawgsrule, Nov 16, 2011 in forum: The Green Room
  19. olddawgsrule
    Post

    Question on my UPS

    Appreciate the response! I have a 100/140watt soldering iron. Is this strong enough? It is an 'older Weller' and hopefully putting out what it...
    Post by: olddawgsrule, Nov 15, 2011 in forum: The Green Room
  20. olddawgsrule
    Post

    Question on my UPS

    Arrived home in the daylight today and checked on my panels. To my disappointment, 3 panels seem to be down... Since there are only 4 to this...
    Post by: olddawgsrule, Nov 15, 2011 in forum: The Green Room
Showing results 1 to 20 of 112 Next >
Search Again
Page 1 of 6