We went through the exact same thing over a month ago. We had a pellet stove professional installed in our garage in mid January. However before...
Lacwood must have resolved this issue as I have burnt over a ton of these so far this winter and I have not had any problems with the pellet length....
Great info. This kind of confirms my concerns. Will wait till the spring to re-visit this issue.....minus 33* right now... lol. I am not even sure my...
Considering an OAK also but I have the same concern as we get those minus 35* to minus 40*s also. What impact would this very cold air have on...
Hi Eric Good advice. Pot is always free of ash. I pull the cleaning rod once a day and might get a clinker now and then..that's it. On another...
New thermostat installed and so far so good. Stove will stop and start again 9 times out of 10.
Will do. Thanks
What should I be looking for? It is set for 60 F but temp will be down to close to 50.
Hi Burt This is great info. I do heat the garage 24/7 but have experienced problems with the stove not kicking back in after cycling for a while....
I'm sure they have. How would you mess it up? Based on comments from dealer, I suspect my oginal defective one came from another stove that had a...
Hi guys Problem fixed. Gasket is fine and vac line is clean. Was able to have auger turn by by-passing switch but noticed nothing was coming our of...
Installed cab50 3 weeks ago and this my second vacuum switch. With vacuum switch not working the auger does not turn so no feed = no heat. Auger will...
My cab50 will cycle less on cold days and with shorter periods between cycles. January has been pretty chilly with nights of -35 and -40....
Separate names with a comma.
