According to the measurements of the fireplace insert it's the correct size log set.
I do not have a fan although I have the option to add one. I attached a pic of my final project. I built a fireplace surround out of 8/4 African...
Many thanks R & D Guy and DAKSY! Problem is solved. It was the limit switch triggering. I tracked it down and monitored continuity. I guess that #31...
Thanks, I will see if I can track that switch down. All my test are closely monitored and for sure will not permanently bypass anything! You know...
Hmm...where is the limit switch located? Is there something I can monitor to see if the limit switch is getting triggered? I do have a digital probe...
Even after my battery experiment you think it's a bad thermopile? I just ran up to Home Depot to get a new thermopile but they do not carry them....
I'm referring to the main burner orifice which according to the directions should be a #26. It shipped with a #20 for some reason. I was able to...
DASKY - I'm running 1/2" line and it's probably in excess of 30 feet from the source. It's natural gas.
I just conducted an experiement which brings up an interesting question. I disconnected the thermopile from the TP and TH/TP screws on the regulator...
I installed a larger orifice today and that helped. The pilot still gets smaller, but not nearly as much. The whistle sounds has also gone away. The...
The "shut of valve" I am referring to is a keyed one that is built into the wall. There is a seperate red knob just prior to the inlet of the...
Another interesting thing I noted is the builder who orginally installed the fireplace used some kind of expoxy on the non-flared fittings that I...
I did try turning the gas shutoff valve way down to see if that would help out the pilot light and it does not have any affect on it. It looks like...
I had a single burner natural gas Desa B-Vent fireplace, Model P324 that used to work just fine until I upgraded to a dual burner and new log set....
Separate names with a comma.
