Thank you both for your help. But yes I wish I knew the cause too
I pulled the control box, just to see if there was anything obvious. But because the plastic is opaque i couldn't. When I re-installed the box and...
No, only while trying to diagnose it.
its bypassed with a fridge magnet
Okay, Directly tested the auger. Works perfectly
I only suggest the idea of jumping the control box so that I can leave all the factory fuses in the loop.
Wired thermostat, the call light is on and the exhaust fan starts. Not a problem with the vacuum, perfect continuity on the vacuum switch while...
Completely pulled the auger and checked the chute, completely clear. Disconnected the ducting and ran a brush through it. I also removed the...
I snaked it 2.5 months ago
Stove all 3" (duravent I believe) 90 degree elbow 16" straight 90 degree elbow 24" through the wall 45 degree termination piece. Apx. 42" of vent...
Auger and tube is completely empty, that had no effect on the function of the auger
I emptied the hopper last night while attempting to diagnose the problem. The auger was no jammed, I believe the control box to be the issue, because...
Nothing at start up.
My stove is less than a year old, but it will be a week before the tech can come out. I took it apart to work through the troubleshooting list. Snap...
Separate names with a comma.
