Are you trying to install the DVL in the collar right off the stove? I snugged my pipe in and tapped it tight with a mallet and block of wood. I used...
I used one to split my load of black birch/maple. It was six cords and cut to 18" to 20". Took my brother and I roughly five and a half hours to...
The pressure is so low with this storm and the wind is so strong that I decided not to take off the chill. I have plenty of sweatshirts! I also think...
Last season i was feeling lazy and didn't want to split down kindling, so i grabbed the corn stalks that were still tied to the steps. Pulled off the...
I took bits of info from the good folks on here and tried to find what worked better than what i was already doing. 400 is a good hot point where...
I have an OCD thing going on when it comes to shoveling. I like to use as much of my hard split wood as i can. I have a piece of 1/2 x 1/2 inch...
Being a new 30 user this year, I have been on a steep learning curve. I read all the info you guys post and try to see what parts affect me most. I...
Had to light up tonight, my son was excited (he'll fit in here!). Had a great top down start up. Tried air control off the stove top temp. Had much...
Would it be a good assumption that the magnetic stove pipe thermometers were designed for the older style wood stoves? Meaning lots of heat prduced...
Ok, so after realizing that I was starting my fires inefficiently, I tried the top burn start up....worked like a charm. First load was N/S 5 random...
Metal bucket is always on cement floor. Never near tinder. I usually clean the front 4 - 5 inches of ash out, they tend to have less char and are...
I let the ashes cool in a metal bucket, sift them through 1/2" hardware cloth (large char goes back into stove for reburn) then spread out on the...
I am on my first burn season with a 30, have burns on both sides. Still learning how to burn. First really cold night tonight and have no problem...
Separate names with a comma.