I have the Condar Cat Digital thermometer in my Encore 2 in 1. You do have a factory hole through the cast iron in the back. I used an undersized...
Are burn times any different with the new Encore or about the same?[/quote] My non scientific answer is they seem to be about the same burn...
My house isn't that big 1300 sq ft. If I load it all the way up. Even with the air down low. It gets pretty warm about midnight.
I've been burn the Encore 2 in 1 for almost a year now. I'm very happy with it. It replace a 0028 cat Encore that I had used for about 5 years, but...
NinoUrbana When you installed the temperature probe in the back of your stove. Did you seal up around the hole where the probe goes through? Thanks
Yes once I got the fire burning well I was able to turn the air all the way down and had no back puffing. Thanks
NinaUrbana Do you turn you air all the way down against the stop, after you get it burning for a long burn? If I try this on my stove it completely...
Get info keep it coming. Thanks
NiñoUrbana Thanks for the write up. I burn my 2 in 1 very similarly, but can't turn the air all the way down without smoking out the windows pretty...
What's the build date of each of your stoves? It in the lower corner on the back. Mine is 08 Dec 2010. Maybe we can figure out if it's a...
Engineroom just curious. How did the rear cover plate break? Was it dropped or just from heat cycling? I have had the 2 in 1 for about 3 weeks...
Quote "Hello, Nekit, i am very interested in the new encore, i also burned a cat encore from early nintys and had some backpuffing problems, i would...
I've had the Encore 2 in 1 for a little over a week now and so far so good. It replaced a 20 year old Defient Encore Cat stove 0028. Compared to...
Separate names with a comma.
