Wallycat, I think you will enjoy the Voyager unit. I have had mine going on 3 years now. Like Chang says, use good dry wood, makes all the...
Having to leave the door open for re-loading is likely due to wet wood and possibly chimney height (draft). If I put dry wood on a bed of hot coals,...
I removed the plate for oak install, not sure if it will make any difference. I don't see how it will based on where it was located. Anyway, manual...
Thanks Chang, I was concerned either my wood was wet or my technique was lacking, but now I hope it is this plate causing the dirty glass. I have a...
Hello, I recently had the Voyageur installed last month. I did not know about the plate and will check to see if it is there, thanks for the heads...
My understanding of the auto start feature was to push it in, then pull it out. It will open the air all the way, then gradually close it after 25...
I use the auto start up only for the initial lighting of fire. I push it in all the way, and can hear it clicking. I assume after 25 mins or so...
Here are a couple of pics of the Voyageur. Note the buildup on the glass. A hot fire with lots of flame only clears the middle of the glass.
Hello, purchased the Quafrafire Voyageur and have been using it now for a few weeks. This is my first insert, never before used a stove of any kind....
Does anyone know the inside dimensions of a 9 x 13 flue tile? Installer said even without the insulation, it would be tight especially if there is...
I am not sure if this guy is WETT certified. He says he has been installing for over 10 years. He said he may have to ovalize the liner to fit it...
Hello, getting a liner and insert installed soon. The installer measured the flue tiles to be 9x13, outside dimension. When asking about insulating...
Jeff, let us know how you like the Voyageur. I am considering purchasing either that or the 2700 model. Someone mentioned it may be difficult to...
The PE looks nice and meets most clearances. No dealer in my area (Detroit Michigan), so I may be out of luck. Thanks for the suggestions!
Opening size is 32" front and 23.5 rear. Height is 27 1/2'. Depth is 20" on bottom and 17' up higher. It gradually slopes up and inward in the...
Hi, I have been looking at wood inserts for a while now, but keep running into the same problem; I just don't have the clearance for both the top and...
Separate names with a comma.
