I just added a zone to my system. I had the foresight to plumb in an extra zone for an upcoming attic refinishing project. The problem began when...
Am I correct in thinking that if I set my three speed Grundfos pump that circulates hot water through my HX on the Garn side of my system on its...
The aspen are gold, the wood is ready and my Garn is ready for it's first full winter of work. I left it unfilled during the summer and now I have...
I am in the final stages of my first burn on my Garn as I write this. To say that I am thrilled is not an adequate expression. The wood I used is...
The system is in and my controls are in and will definitely do what I want them to do. Thanks Gooserider for the helpful hints and to Nofo for being...
The Doc says I can now go back to working on the plumbing. Started setting in my cast iron radiators in the hot tub area and found out real quick...
I was in the home stretch on the project. The hot tub has been moved into its new room. I built a hx based on a NoFo concept. The radiators to the...
I have it all piped in and ready to go, but I am still without an adequate control strategy. I originally purchased a Tekmar 356 for use on a on a...
In my never ending quest to get my Garn installed, I am now to the point of going through the wall with my intake and exhaust pipes. I have been...
I posted this over at Garn, but did not get a response. Thought I might try it here. Slowly but surely my project is starting to take shape. On...
I am now entering into the actual installation phase of the Garnzilla! I am including my first pics of just pipes on the floor and trying to give...
Any of you out there have positive experience with copper suppliers on the internet? Are there any I should avoid in your opinion :snake: ?
Pex Supply has good products. Pex Supply has decent prices. Pex Supply pexes me off! I just got the order from them to build my system. My Tekmar...
I am beginning to hone in on my Garn 1500 installation. Thanks again to all of you that have been giving me advice. I am going to plumb an initial...
I have decided to open another thread on my garn installation. Thanks to so many of the participants, especially Jim K. and Slowzuki, I think that I...
I spent months perusing this forum and reading on gasification boilers before deciding on the Garn 1500. I have basic plumbing experience and helped...
Okay, I have now put another couple of weeks of research into my mental hopper and have come back around to trying to locate information on how to...
My wife and I have built two homes on our sixty acre ranch near Elbert, Colorado on the Palmer Divide. We built in a wooded area and so we have...
Separate names with a comma.
