Not hard, just take alot of pictures of it before you remove it so you have a reference for
where to attach the wires.
Nothing different stove is on level 3 feed trim 1. House is a comfy 74, I'm not in the cold north, only supposed to get
down to 6 or 8 so no minus...
try this post has info on what your looking for
Power House where OK, heat was fair, alot of ash.
When I was burning Powerhouse pellets I had to back the feed trim down to get a better more active flame. Pellet lengths were
short which ment more...
Yeah sure blame the phone, we know what you ment ;)
If that is what comes out of the pipe I have to get one of those stoves.==c
That panel comes off, on mine I have to use a flat blade screw driver to get it started.
I scribed a line on the damper so that I could get it back...
That looks like ENVIRO's burn pot scraper.
Nothing fancy just heat.[ATTACH]
If you can read the braille from the little air holes on the bag.
Presto Logs , so far not a bad pellet
Leave the stove on 24/7 unless cleaning. Of coarse it is on a set back thermo.
Another guy secrect is out, Starting and running a pellet stove is not as hard as we make it out. ;)
Guess I should have went north for Halloween, our gov. postponed ours until Monday by executive order because of Sandy.
How many little bags to the...
Never named the stove myself but I think the wife named it Honey because when she gets near it she is always saying honey your hot
and I know she...
I use a Honda 6500 watt, runs the pellet stove, fridge and the TV's.
I won't say it sips fuel but I get about 11 hours off a tank full (7 gal.)
My domestic hot water comes from my boiler so no need to check as long as my shower is hot.
We can all tell you how much we like our stoves and what we can heat with them. But it all boils down to what the other half likes and is up
I thought there already was a sticky for someones (JTs) pellet testing.
Separate names with a comma.