Hello All!! I am back to report my house has maintained a balmy 74 degrees in the single digit temperatures here in Michigan!! Sooooo, now I am going...
Well, I am jumping to any type of Celebration yet, but I bought a new thermalcouple and so far all is performing properly!!!! Thanks to...
I can solder and have a steady hand but didn't know that you could fix those like that. I will check the contacts in the sockett. Do you think that...
[ATTACH]
Well, in frustration (and a couple beers:-)) I hit the top of the control box after hitting restart for about 20 mins (it usually works, you know...
Ok. I pulled the comb motor off and cleaned. I repositioned the TC. I did the dollar bill test on the door and it was loose. I tightened that up to...
Dex, what and where is the airwash? Is that around the hinge at the bottom of the cleanout door? The ceramic cover and the TC is extended an inch...
Very good, I will check that out while trying to troubleshoot everything else. Thank you!!
I am located right near Grand Rapids, Michigan. But am more than willing to get online. I found one for $45, is that a good price?
Is there anyplace where I can get the gasket/seals for the doors in the front? When I was home at lunch I was hearing a slight air suction near the...
Oh, gotcha. Yes, the thermocouple is clean and is against the end of the ceramic cover. I will check the combustion blower. Do I have to pull it out...
I havent tested the gaskets in any way. And when I cleaned I didnt do anything with the combustion blower except vacuum around it. When I plug it in...
Hello fellow pelletheads! I just purchased a used Quad 1000 and haven't had any luck keeping it running steady. I have cleaned it, adjusted feed...
Separate names with a comma.
