If there are enough long pellets in the hopper, it bridges the opening, at the bottom of the hopper, that feeds into the auger. The pellets don't...
We just restored an Invincible (serial # 00001997 - label on back of stove says "tested 1992" !). Had to replace two motors, & now it works, &...
Spray graphite, huh? Is that to keep the pellets from getting hung up on the hopper sides? Where do you get some of that?
The ESP probe screws into the flue pipe at the back of the stove. There are 2 wires (white, black, or red). A 1/4" nut holds it onto the pipe....
I agree with Lousyweather - if you've compromised the circuit board, nothing will work like it's suppose to. There is an ESP (exhaust sensor probe)...
I've had people put stoves in unfinished basements. If you want to get more heat upstairs, you'll need at least 2 floor registers. Ceiling fans...
There's nothing like a trained tech coming to your house to fix any problems. If you try something that they suggest, you might do more harm than...
If the pellets aren't feeding at the proper rate, check the slide plate (inside that metal compartment where the sawdust collects) It should be...
DEFINITELY empty out the pellets. If you can put the stove in "test" mode, it'll empty the auger of pellets, too. If you can get to the flue pipe...
Between the 2 stoves, the Englander is a little better/reliable. I've cleaned & serviced both brands, & the Englander is the better one. OR, you...
I have a Sears Craftsman vacuum cleaner (16 gal) If you put the hose into the clean-out "T" & block off any airspace in the pipe with a rag. Then...
A couple of things - yes, a wood stove is a simpler way to heat than a pellet stove. But how about priorities? Would you rather spend a...
================== I spent 3 hours this weekend picking up, & stacking a few tons of pellets. Another hour (2 tops) & I'm set for next winter....
I have a wood stove (10+ years old) downstairs, & a pellet insert upstairs. Unless it's really cold at night, I won't even bother using the wood...
Separate names with a comma.
