Used some lighter fluid and it took off the burned up adhesive. The new foil tape works much better. Thanks for the help smokeytbear
Good point. It is likely much hotter under a layer of foil. Any thoughts on what to use to clean off the old adhesive?
I would think that the temperature ratings are okay. I can touch the outside of the pipe. It's dual layer with fiberglass between from a pellet...
@SmokeyTheBear: The packaging says nothing like that. The avery dennison website says this for the product: FASSON® 0810 2 mil, high tensile...
the 3m tape looks good; ordered and on it's way. Is there anything I should use on the pipe to make sure any acrylic residue is removed?
About 10 days ago, I put foil tape on the vent pipe joints of my stove as that's what the manual called for. Around the same time, it started to...
I've gone through ~5 bags of another brand, and no problems. I'm going to stay away from the Maine's Choice. Thank you all for the help. Thanks for...
Smokey & Imacman: I removed the two screws, but the panel is not moveable. I'm not sure why there are screws. When I removed the motor, I put a...
I took a somewhat flexible plastic stick and got some of the pellets off the top of the auger and the bottom of it. It has 2 screws on the top of the...
I tossed in some pellets and emptied the hopper and started it up. The pot started to burn, but the auger would barely move. I could hear the auger...
It had light #3 flash. I looked through the "troubleshooting" in the manual. The damper was at 1/2. When it burned out, it was because there were no...
It was running on setting 1 or 2 (out of 4). I wanted to start out with the lower settings. I'm using setting 2 right now.
I got a new Bosca Spirit 500 deluxe a few weeks ago and just installed it. I poured in a bag of pellets and was able to get it started and it ran for...
I was looking at the bosca spirit 500. The manual says it only needs to be 12" out for venting
Thank you for all the replies. To answer the questions: Burning wood sounds like more work. I do have 2 acres, with most of it wooded, but I don't...
I've been looking at getting a pellet stove to supplement my oil heat system and have come up with 3 potential installations/options: 1) Direct...
I see a couple ebay sellers selling them for 1800ish. I'm around portland maine. I don't know of any dealers nearby. I did find a craigslist ad...
Where can you find one for $1500? I'm looking to buy a spirit 500 pellet stove
Separate names with a comma.
