1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 2
  1. k0wtz
    Post

    New Natural Gas Service Install Cost. Yikes!!!!

    could i make a suggestion consider a high e heat pump. we put in a 16seer by goodman. el. bill went up 28,00 over last year when we burned wood....
    Post by: k0wtz, May 1, 2011 in forum: It's a Gas!
  2. k0wtz
    Post

    Vermont Castings Pinnacle Gas Conversion

    i have a ventfree and next season will be going vernted. you cannot use any sort of scents in you house. you must be very careful of even dusting...
    Post by: k0wtz, Feb 22, 2011 in forum: It's a Gas!
  3. k0wtz
    Post

    NG supply line undersized?

    i had an a/c condendenser added one time in my business. the electrician said we were a tad undersized on the main wiring but the chances of them...
    Post by: k0wtz, Jan 17, 2011 in forum: It's a Gas!
  4. k0wtz
    Post

    Vermont Casting N gas to LPG

    if they do it make sure their liablilty insurance is paid up!!!! bob
    Post by: k0wtz, Jan 13, 2011 in forum: It's a Gas!
  5. k0wtz
    Post

    Flame color changes?

    i have a vent free heater all it takes is furniture polish, lighted candles or anything that puts a smell in the air. those heaters are very...
    Post by: k0wtz, Jan 10, 2011 in forum: It's a Gas!
  6. k0wtz
    Post

    Gas ventless wall heater or electric heater??????

    im not too sure you would be money ahead to use electricy especially if you went 220v. gas takes a lot of extra stuff compared to running a...
    Post by: k0wtz, Jan 10, 2011 in forum: It's a Gas!
  7. k0wtz
    Post

    Vermont Casting N gas to LPG

    let me tell you i have a unvented gas heater and im getting rid of it. a continual odor in the house, plus extra humidity and when i wash the widows...
    Post by: k0wtz, Jan 10, 2011 in forum: It's a Gas!
  8. k0wtz
    Post

    Vermont Casting N gas to LPG

    i think wisely he has given up on the conversion. now he is inquiring about the cost of a new one. there are webites regarding what you want to...
    Post by: k0wtz, Jan 10, 2011 in forum: It's a Gas!
  9. k0wtz
    Post

    Vermont Casting N gas to LPG

    AMEN bob
    Post by: k0wtz, Jan 10, 2011 in forum: It's a Gas!
  10. k0wtz
    Post

    Vermont Casting N gas to LPG

    there is more to it than that. all orfices have to be changed along with the other parts you mentiioned. then finding an installer that will accept...
    Post by: k0wtz, Jan 9, 2011 in forum: It's a Gas!
  11. k0wtz
    Post

    Vermont Casting N gas to LPG

    the parts alone will kill you in cost and if installed incorrectly it will kill you. take the advice and leave it where it is. good luck bob
    Post by: k0wtz, Jan 9, 2011 in forum: It's a Gas!
  12. k0wtz
    Post

    converting a VC radiance vent-free from LP to NG HELP!

    jackie are you saying you dont have n/gas or any gas presently? bob
    Post by: k0wtz, Jan 1, 2011 in forum: It's a Gas!
  13. k0wtz
    Post

    converting a VC radiance vent-free from LP to NG HELP!

    if you want used go to craigs list check within several cities in your state. i really like the vermont castings the radiance goes about 400lb...
    Post by: k0wtz, Jan 1, 2011 in forum: It's a Gas!
  14. k0wtz
    Post

    converting a VC radiance vent-free from LP to NG HELP!

    ive been down jackies road and it just wont work after that i learned my lesson. i just purchased a mint v/castings radiance stove dumb me i assumed...
    Post by: k0wtz, Jan 1, 2011 in forum: It's a Gas!
  15. k0wtz
    Post

    converting a VC radiance vent-free from LP to NG HELP!

    the problem is im sure anything can be done but vermont castings had some stoves out there that used some sort of a ceramic orfice. according to...
    Post by: k0wtz, Jan 1, 2011 in forum: It's a Gas!
  16. k0wtz
    Post

    NO MORE WOOD

    i kept my wood furnace mainly for resale value of my house that sets on 50a and more dead wood than ever be burned. i helped a guy cut and load some...
    Post by: k0wtz, Dec 29, 2010 in forum: It's a Gas!
  17. k0wtz
    Post

    new glass or what!!!

    the glass is etched from so much heat im afraid. i was able to take a razor blade scraper and with the bonami clean it up pretty well. yes the...
    Post by: k0wtz, Dec 27, 2010 in forum: It's a Gas!
  18. k0wtz
    Post

    new glass or what!!!

    well i did some searches here and looks like around 140.00 but i will have the wife pick some up to try i wonder about bonami also. what do you...
    Post by: k0wtz, Dec 26, 2010 in forum: It's a Gas!
  19. k0wtz
    Thread

    new glass or what!!!

    i purchased a stardance l/p stove. the glass panel is very discolered. i cannot get it cleaned up seems to have some sort of finish put on the...
    Thread by: k0wtz, Dec 26, 2010, 5 replies, in forum: It's a Gas!
  20. k0wtz
    Post

    v/c radiance not lighting

    we were very gentle with that stove. i didnt test fire it before we took it out we did unhook it from the gasline. i hope by now jarrette has it...
    Post by: k0wtz, Dec 26, 2010 in forum: It's a Gas!
Showing results 1 to 20 of 36 Next >
Search Again
Page 1 of 2