I cleaned out the stove and shut it down for the offseason. Last year I sealed up the intake and exhaust pipes outside and left the stove door...
I had cleaned out my stove in the spring and put an open container of baking soda inside the ashpan to absorb moisture in case a little got in the...
I clean my XXV every 1 to 2 weeks. By cleaning I mean completely scraping the heat exchangers down along with all sides (left, right, top, & back)...
Just counted this weekend and I have burned just over 3 tons of pellets so far (160 bags). How is everyone else fairing?
My manual says you can extend your heat probe using 18-2 thermostat wire, but says maximum length of 100 ft. But then in the note below that it says...
get a lot of ash/soot outside your stove when you clean it? The minute I open the door stuff falls onto the stove ledge and the floor. I scrape my...
Does anyone know if the feed rate knob on the Harman XXV correlates directly to lbs/hr? So if I set the feed rate on 2 does that mean 2 lbs/hr? My...
[IMG] [IMG] The basement is still a work in progress, but the stove is installed and running. It has been 30 deg here in the mornings and colder...
Hey guys, I have been researching the pellet stoves for about 6 months, but was looking for some opinions now from some actual owners of the stoves....
Hi everyone, I'm guessing you may get this question quite often, but in scanning through the threads I didn't see one that answered my question in...
Separate names with a comma.
