1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 4
  1. hayrack
    Post

    powrmatic memco mw-100 wood boiler ?

    I used a Memco for 10 years before replacing with an Eko 40. They do like wood, but if you are home and have plenty of wood they work fine. I had a...
    Post by: hayrack, Dec 30, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  2. hayrack
    Post

    Does ANYONE have success installing EKO indoors?

    Mine is in my basement for the second year. I have learned to burn well seasoned wood and not to open the door until it is burned down to coals. I...
    Post by: hayrack, Feb 14, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  3. hayrack
    Post

    EKO 40 secondary air passages may be plugged

    Thanks Cave2k. I probably will put it back in, I just had to leave it out for a while to verify this was my problem
    Post by: hayrack, Feb 14, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  4. hayrack
    Post

    EKO 40 secondary air passages may be plugged

    I Have been burning again for about 12 hrs. with no problems. The only thing different I have done is remove the flapper door for the fan. I think...
    Post by: hayrack, Feb 13, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  5. hayrack
    Post

    EKO 40 secondary air passages may be plugged

    Thanks for the info and pictures everyone. I just got back in the house and am going back to the basement to check the holes in the nozzle. I see...
    Post by: hayrack, Feb 12, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  6. hayrack
    Post

    EKO 40 secondary air passages may be plugged

    Chimney and stovepipe are clean as a whistle also. I started at the chimney and have worked my way back to the nozzle. This may be the culprit. I...
    Post by: hayrack, Feb 12, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  7. hayrack
    Post

    EKO 40 secondary air passages may be plugged

    I have the front panel off and everything looks good and clean. I ran it last year without the door flapper for the fan, and I thought it may be...
    Post by: hayrack, Feb 12, 2011 in forum: The Boiler Room - Wood Boilers and Furnaces
  8. hayrack
    Thread

    EKO 40 secondary air passages may be plugged

    I am on my second year with my EKO 40 super. I burn good dry seasoned wood and have had little trouble until this week. My theory is that my...
    Thread by: hayrack, Feb 12, 2011, 11 replies, in forum: The Boiler Room - Wood Boilers and Furnaces
  9. hayrack
    Post

    EKO with a primary loop

    I like your setup. I have the Laddomat in my system, but have always wondered why you could not establish boiler protection with a primary loop....
    Post by: hayrack, Feb 5, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  10. hayrack
    Post

    Back to the drawing board. Tank Design

    Have you looked for a used propane tank? They are usually 5/16" thick and have tappings all welded in. I had mine given to me. I think if you look...
    Post by: hayrack, Jan 29, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  11. hayrack
    Post

    Anyone using an aluminum tank for pressurized storage?

    Don't use any galvanized fittings. Galvanized will destroy your circ pumps. You should be able to find a used propane tank for little or nothing.
    Post by: hayrack, Jan 28, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  12. hayrack
    Post

    Any other Memco users?

    He is right, the flat plate makes no sense. You would only do that if you had an outdoor unpressurized boiler. Get a manual and study some piping...
    Post by: hayrack, Jan 26, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  13. hayrack
    Post

    Any other Memco users?

    With pine you will be more like 2-3 hrs. If your heart is set on the Memco call Melvin Manufacturing in Jay, Me. They still have the parts and can...
    Post by: hayrack, Jan 24, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  14. hayrack
    Post

    Any other Memco users?

    Joecool85, Where are you in central Maine? I too am in central-eastern Maine (Bangor area) I had a Memco wood boiler for 10 yrs. and just replaced...
    Post by: hayrack, Jan 24, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  15. hayrack
    Post

    automag

    Sottb, You are correct about the newer designed automag that does run off ac power. I was referring to the aa like you mention. I have seen...
    Post by: hayrack, Jan 23, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  16. hayrack
    Post

    automag

    An automag is a normally open valve. It is powered by 24 volt dc power not ac like a zone valve. It has a coil that magnatizes a plunger so when...
    Post by: hayrack, Jan 23, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  17. hayrack
    Post

    EKO Owners - Brick placement matters...I think

    I started burning with my eko 40 in November of 09 and I have wondered where the best placement of the bricks would be. I burned for a few weeks...
    Post by: hayrack, Jan 21, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  18. hayrack
    Post

    Ladomatt

    Randy, I have the grundfos pump on my Laddo. Looks like we may have located a couple of laddomats. I paid $329 for mine from Kotly when I bought my...
    Post by: hayrack, Jan 20, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  19. hayrack
    Post

    Ladomatt

    I already tried CT greenheat and they are not carrying them either. I paid about $329 from Kotly last Spring when I got my boiler from them. I...
    Post by: hayrack, Jan 19, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
  20. hayrack
    Post

    Ladomatt

    Randy, When I get a fire going I load it to the gills and let her rip! I never have overheat or pressure issues.
    Post by: hayrack, Jan 18, 2010 in forum: The Boiler Room - Wood Boilers and Furnaces
Showing results 1 to 20 of 73 Next >
Search Again
Page 1 of 4