yeah it looks like a branch - im getting more today if the rain holds out ! The shed behind it is 20L X 12D X 10H to give you a reference of the...
I was chatting with a friend that manages a tree service the other day and asked him if they had any logs they wanted to get rid of. New Md laws wont...
im with westkywood on this - go find some pallets and stack them off the ground on there sides with the bark on - it will keep them from soaking up...
the "one way bearing" as it is called by yammi is located in the wet clutch system - it controls the engine braking on the griz - when it goes the...
Backwoods- it will pull stuff all day long in high gear - i used mine to pull a decoy trailer for goose hunting It pulled fine but after a while...
The only advise I have if your pulling stuff with that grizzly is to use low gear !! You will take out the one-way bearing that controls your...
John Deere 5400 with a loader and chains. Its the perfect tractor for the woods -its 68hp and has an open station so no broken glass.
be careful towing with the grizzly 700 always use low - the one way bearing in the clutch goes out when you pull more than you should(you will...
Pramatol - get it at your local farm store - spray it and forget it nothing will grow for a while
I am going to build one this summer - Looking for used telephone poles right now to use as posts. Im thinking 20x10x7 open front with and...
I have an Earthstove bv400c insert. This has been a great stove. The fans on this stove puts out a lot of ai but is a little on the loud side. The...
what size bar you running on that 046[/quote] Its an 046 with a couple of tweeks with a 28inch bar. I normally have a 20 inch bar on it.
The splitting part has become a bit of a problem. I think I am going to try and get the JD tractor back there and scope up 2 slabs at a time in the...
The top of this tree was a few cords. I have no idea how many cords im going to get but its going to make a lot of heat !! I put another...
Had this little fella fall 2 years ago - I finally got around to cutting her up. http://tinyurl.com/btntbb
Back in the day when real estate was booming I hauled my wood in a truck like this !! I had everything J.C. Whitney had to offer on it. [IMG]...
I would go down the street to Lowes and get one - I just got a 13nc for a few hundred off list
i just measured it - the chimney is a whopping 8.5 feet !! i guess i need to get another pipe pipe section.
I dont think I have an over burn sit-che-ation the chimney is only about 12 feet in length. It is on the 2nd floor how ever and the wind around here...
I have installed a 13nc and was wondering if I should install and damper in the pipe or leave it out. A guy at the local stove shop said it was not...
Separate names with a comma.