How do I do this?
From Smokey the Bear: The very first thing to do is to make sure that the connections on that jumper are tight and not oxidized because if they are...
Excuse my ignorance, but what is the POF system and how do I clean it? Will the instructions of Gary Gileau cover it?
Appreciate your advice very much. Yes the fans work perfectly fine, actually I am going to take your advice and change the air output pipe to fit...
Actually the augur stops spitting out pellets and this causes the flame to go out.
Could this be causing my problems?
Here are some pictures of the back of the control board. Looks like a sealed unit to me, but the red wire at the top looks very like what John C...
Yes it looks like copper to me too.
This is the side of the stove with the control panel.
Here's the side of the stove where the control panel is The last picture is the air outlet pipe at the wall that attaches to the stove. As you...
Here are some pictures of the back of the stove, sorry that they are all sideways -
Sorry to take so long .. the holidays etc. Here are some pictures - Control Panel on the side. I removed all the buttons and screws and I still could...
John C. thanks for your help and interest, I am very appreciative. My control board does not look like this! It is on the side of the stove and to...
At this point, I have to pull my stove into a position where I can really get at the back of it and take out the control board which is on the...
By control board, do you mean where the heat settings and fan buttons etc are?
Sorry the ID is so unclear (awkward to get at)
OK think I got it.
Did it work, I can't see the picture? How do I upload an image?
Hope this picture is OK, sorry for taking so long, but had to do other stuff!
I bought a used Whitfield pellet stove on craigslist. It has had problems from the start, one of the main ones being that I know nothing about pellet...
Separate names with a comma.
