1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 10
  1. jtb51b
    Post

    Advice on stove selection

    With those prices for wood, is it possible to break even with wood heat? Jason
    Post by: jtb51b, Feb 22, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  2. jtb51b
    Post

    Broke the damn latch on my stove

    I broke mine as well. With a full load of wood! Needless to say I made one REAL fast! I used a 3/8 x1 1/2" all thread bolt, cut the head off and...
    Post by: jtb51b, Dec 25, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  3. jtb51b
    Post

    Anyone want to play what's wrong with this picture?

    That is all well and good but as a person who has WON in small claims court I can tell you that most of the time you do NOT ever see your money...
    Post by: jtb51b, Dec 18, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  4. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    Well the new cat is in and I was able to burn it one night before it warmed up too much to burn at all.. Man what a difference. The stove was back to...
    Post by: jtb51b, Dec 16, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  5. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    I heat my home in a warmer climate from the basement. It is very possible, but you have a couple things working against you: The size of your...
    Post by: jtb51b, Dec 12, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  6. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    I load like that all the time, unless its just going to be too warm. Seems mine used to run better loaded full. I ordered my new cat friday, it...
    Post by: jtb51b, Dec 11, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  7. jtb51b
    Post

    Horizontal chimney pipe length (thru the wall)

    Hmmmm, tough spot.. I would offset it before I went through the living space. Is there another location that would allow a straight up install? I...
    Post by: jtb51b, Dec 4, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  8. jtb51b
    Post

    Horizontal chimney pipe length (thru the wall)

    You will have to attach the wall support directly to the wall, and then use offsets to clear the 20" overhang. These parts aren't available from...
    Post by: jtb51b, Dec 4, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  9. jtb51b
    Post

    Horizontal chimney pipe length (thru the wall)

    I think he is talking about room overhang. Not a traditional soffit overhang. Such as a bay window would protrude, I know he isnt trying to block a...
    Post by: jtb51b, Dec 4, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  10. jtb51b
    Post

    Horizontal chimney pipe length (thru the wall)

    If you use the 36" piece what will you be bolting the cleanout T bracket to? It should be attached to the wall, and then the chimney stacked up from...
    Post by: jtb51b, Dec 4, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  11. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    I understood that the problem was the cold air being leaking directly into the cat, not an overfire situation. I am in the refractory industry, and...
    Post by: jtb51b, Dec 1, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  12. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    Well, I think I am going to order a new CAT for my stove.. Mine is very sluggish, does NOT glow these days (even with a very high cat temp), and...
    Post by: jtb51b, Nov 29, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  13. jtb51b
    Post

    Trouble Finding Dealer for BlazeKing

    I had the same problem, there were 2 dealers listed in TN (I am in Alabama, both were 150+ miles away) but both said they did not sell Blaze kings....
    Post by: jtb51b, Nov 27, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  14. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    We have the same IR therm. I am very glad we don't have the same stovetop temps! I would be cooked out of here way down south! Great pics.. Jason
    Post by: jtb51b, Nov 24, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  15. jtb51b
    Post

    Using a thermostat to turn on/off a fan.

    I like the RIB.. I am definately going to be doing this soon. I have to order the fan. I may just go with a line voltage thermostat tho, because I...
    Post by: jtb51b, Nov 20, 2012 in forum: DIY and General non-hearth advice
  16. jtb51b
    Post

    2012-2013 Blaze King Performance Thread(everything BK)

    Sounds normal to me. 300 degrees even sounds right for 1.25.. Try it on 1.5 you should see around 375 or so. It will probably run a little less...
    Post by: jtb51b, Nov 19, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  17. jtb51b
    Post

    on-line blaze king dealers?

    Let me be the first to recommend you DO NOT buy from a dealer you can't drive to. I made that mistake and it cost me a LOT of time and hassle to get...
    Post by: jtb51b, Nov 17, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  18. jtb51b
    Post

    BK thermostat too loose

    Gotcha, I understood that the knob was tight to the shaft and thermostat but it just did not have enough tension to stay at a set location by its...
    Post by: jtb51b, Nov 15, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
  19. jtb51b
    Thread

    Using a thermostat to turn on/off a fan.

    I happen to have an extra, 7 day multi-setpoint programmable, WIFI thermostat. I would like to use it to turn on and off a level to level air-share...
    Thread by: jtb51b, Nov 15, 2012, 5 replies, in forum: DIY and General non-hearth advice
  20. jtb51b
    Post

    BK thermostat too loose

    Thats not what adjusts tension on the knob to hold it in place. You would have to remove the thermostat and do some work to get it repaired.. I did...
    Post by: jtb51b, Nov 15, 2012 in forum: The Hearth Room - Wood Stoves and Fireplaces
Showing results 1 to 20 of 185 Next >
Search Again
Page 1 of 10