Hi all! I am hoping someone might be able to help me out. I have an Englander PDVC that I have had for 3+ years and has been great for the most part,...
Hi all, I am getting ready to replace the door gasket on my englander 25-PDVC. I was wondering if there were directions available for this. I...
Thanks Corie, Would you recommend waiting until the combustion blower gasket comes in and taking the entire blower out for cleaning? Steve
Pete...I would like to know the answer to that as well. Thanks for asking.
Hi all, I was hoping Mike or someone else would be able to help me out with this questions. I am wondering if it is possible to clean the exhaust...
Found this number on www.searchbug.com. Also, this number can be found here as well: http://www.harmanstoves.com/doc/business_profile.pdf Harman...
graphite , being inert , if enough of a coating is present , it doesnt allow combustion in some circumstances, i usually disable the igniter when...
Can you tell me where I might be able to get some dry graphite? Also, do you have any suggestions on how to make the pellets not stay to the side...
Hi all, I am hoping someone can provide me with some insight into an issue I am having with my Englander 25-PDVC. While my stove is running, there...
Mike, Thank you for all of your help! I appreciate it!
tell me the manufacture date and i will tell you the proper settings[/quote] Manufacture date = 10/06
tell me the manufacture date and i will tell you the proper settings[/quote] It was purchased last March from Home Depot. So, would that be...
I was wondering if anyone could tell me what the factor pre-sets should be for the "low fuel feed", "low burn air", and the "air on temp" should be...
Thanks GVA...I did swap bags of pellets with my father too just in case it is a bad batch.
likely possibility , also check the door and window gaskets , slight chance if it was a sudden change but worth looking into: easy check , when...
Hi All, I am having a bit of a problem with my Englander 25-PDVC. I was burning energex and had no problems. I am now burning Corinth wood pellets,...
I don't know about Mike, but I suggest you install it, put pellets in it and light it. :-) (I know... always a smart a$$ around somewhere.....
That is what I thought. I bought the unit at Home Depot and all of my other research has shown that it is to only burn pellets. Thank you Mike for...
Hi all, I was wondering if any of you have heard that the Englander Model # 25-PDVC can burn 50% pellets and 50% corn. Is this true? I was reading...
Separate names with a comma.
