I looked for an adjustable 90, but did not find one.... I dont have the icc pipe, but could i use a T horizantially than but a 90 to the...
I am using 3in Simpson duravent. I go from the stove straight outside to a tee, then up 3 ft to a 90 and vent. I am heating 2 levels about 2000sq...
I am looking to adjust the angle on the stove so it blows more out into a hallway in my house. Right now I have it vented straight out and up. I...
Hey guys, just an update on my issue..USSC sent me a new control board, and I installed it today. So far all is well. I did notice a little smoke...
I got everything apart and cleaned the auger up with Don2222 direction. Got everything put back together and fired the stove up. Ran perfect in the...
Hey Smokey, I pulled the auger out as far as I could and twisted it back and forth. Nothing seems to be jammed in there. I do have a hard time...
Hey guys, I have an update....I received the auger motor from us stove. I installed it and still have the noise it seems to be coming from the auger...
Ill have to check them out....Ill send the ussc one back..I thought the price was kinda high. The shaft on the auger has a hole in it for the...
$130
Has anyone removed the auger cover? It just appears to fastened with two screws and sealed with hi temp sealant....
Thanks for the help Smokey, I checked the connection between the motor and auger, and everything was good. I also jumped the switch and I...
Hello, I noticed today that my stove was not as hot as usual and was not dropping pellets like it should. I was observing the auger motor and it...
Where do you install the thermocouple?
Ouch, they are expensive.... Are you putting the thermocouple in the heat exchanger?
I was able to get the prestologs for $199. So far they seem to be burning slightly hotter than the stove, with a little more ash. Not bad for $199......
Hello, I am just about out of the stove chow that Ive been burning. The local HD hasnt had it this year. I am looking for opinions on the American...
Hello, Looking for the best way to seal my appliance adapter to the stove. Problem is the stove is in a room where I have to remove it during the...
Separate names with a comma.
