I have done quite a few installs and I'm fussy about efficiency and automation. Attached is a sample drawing of how I would pipe it (option 3?)
Have you inspected the chimney with a mirror? Maybe there is an obstruction...
It doesn't look like the boiler was piped according to any diagram Tarm Biomass has produced. From what I can see in the pictures, it was piped in...
You shouldn't need to seal the joints. once the chimney heats up, the negative draft should be pulling air in through those cracks. depending on...
If you put it in the order of return on investment, windows are lowest on the list of improvements you should consider. Much cheaper would be to air...
In that case, I would suggest looking into air sealing/insulation for your home as a way to reduce the heating demand.
Greenwoods are particularly picky when it comes to draft. Make sure your chimney is at least 18' tall and two feet higher than anything within 10'...
Have a pro do it. The hundred and fifty bucks you spend is worth it for the peace of mind. BTW we charge between 3 to 4 hours at 85/hr to clean...
I'm a big fan of well insulated unpressurized storage. Either a concrete cistern or fabricated tank. There is a lot of flexability with a tank...
We normally use a double pole RIB relay to tie in the safety circut. once water is proven, power is supplied to the second leg of the coil on the...
Separate names with a comma.
