1. Welcome Hearth.com Guests and Visitors - Please enjoy our forums!
    Hearth.com GOLD Sponsors who help bring the site content to you:
    Jotul Cast Iron Stoves
    Woodstock Soapstone Stoves
    Hearth and Home (QuadraFire and Harman Stoves)

Search Results

Search Again
Page 1 of 2
  1. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Yep had another fire last night, just a small one, but it went well, no smoke at all. Great draft. I'm going to use it this winter, then over the...
    Post by: RugerRedhawk, Jan 29, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  2. RugerRedhawk
    Post

    Easiest way to add 3 feet to a masonry chimney?

    Can I test it out with just fitting a piece of stove pipe over the extruding clay flue on top? This doesn't have to be pretty, as long as it's safe....
    Post by: RugerRedhawk, Jan 28, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  3. RugerRedhawk
    Thread

    Easiest way to add 3 feet to a masonry chimney?

    My chimney is about even with the peak, and not far from it. I think I could benefit form another 3 feet of height. Surely I could get some block,...
    Thread by: RugerRedhawk, Jan 28, 2013, 2 replies, in forum: The Hearth Room - Wood Stoves and Fireplaces
  4. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Well it went mostly well. I burned just some 2x4 scraps for about 45 minutes. Then slowly added small split pieces of hardwood. I set the baffles in...
    Post by: RugerRedhawk, Jan 25, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  5. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Thanks, I'll try babying it a little more tonight or in the morning and see if I have any better luck.
    Post by: RugerRedhawk, Jan 24, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  6. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Are these things legit? http://www.northerntool.com/shop/tools/product_21928_21928
    Post by: RugerRedhawk, Jan 24, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  7. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    There is a hill behind the shop, and some red pines, nearby, but no other buildings. I'll have to check on the 3 feet above the roofline, I can't...
    Post by: RugerRedhawk, Jan 24, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  8. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Yeah, I started with a few 2x4 scraps, but probably added a few logs too quickly. I saw good smoke coming out of the top though, it oddly seemed...
    Post by: RugerRedhawk, Jan 24, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  9. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Masonry chimney with clay flue. Masonry/clay chimney. I haven't measured it, but I don't think it's quite 15 feet. Probably closer to 12-13, but...
    Post by: RugerRedhawk, Jan 24, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  10. RugerRedhawk
    Post

    Ok, I don't think my setup is going to work, looking for feedback

    Oh yeah, strike 4 is that it's a single story building, so the chimney isn't that tall. I've burned with wood in the past, so guess I should have...
    Post by: RugerRedhawk, Jan 23, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  11. RugerRedhawk
    Thread

    Ok, I don't think my setup is going to work, looking for feedback

    Just installed an Upland 207, the style that has the outlet on the back of the stove, not the top. So I needed 2 elbows to get to my thimble. Then...
    Thread by: RugerRedhawk, Jan 22, 2013, 15 replies, in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  12. RugerRedhawk
    Post

    Stove pipe oval to round adapter question

    Wasn't a big deal, I ended up cutting it about 11" long and it fit no problem, just as an update in case anyone else reads this.
    Post by: RugerRedhawk, Jan 22, 2013 in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  13. RugerRedhawk
    Thread

    Stove pipe oval to round adapter question

    I have an upland 207 wood stove. The outlet on the back of the stove is set up for 7" stove pipe that has been ovalized. After considerable effort I...
    Thread by: RugerRedhawk, Jan 22, 2013, 1 replies, in forum: Classic Wood Stove Forums Pre-EPA (prior to 1988)
  14. RugerRedhawk
    Post

    Question about thimble through brick wall

    I definitely will. I have to clean up the area and hook my stovepipe up, hopefully test it out tomorrow night. The stove looks great, had one of...
    Post by: RugerRedhawk, Jan 20, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  15. RugerRedhawk
    Post

    Question about thimble through brick wall

    It's all cemented up, seems like a good seal. Thanks for the tips. This is in a separate workshop building, not sure I'm going to get good enough...
    Post by: RugerRedhawk, Jan 19, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  16. RugerRedhawk
    Post

    Question about thimble through brick wall

    Ah, I very well could be using the wrong terms. Here are images of exactly what I'm looking to use. http://imgur.com/a/ZXQz0#0 There are pics...
    Post by: RugerRedhawk, Jan 19, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  17. RugerRedhawk
    Post

    Question about thimble through brick wall

    The end of the double wall joins perfectly with my 8" black stovepipe. It would be about 9" from the thimble to the stud on the interior wall. The...
    Post by: RugerRedhawk, Jan 19, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  18. RugerRedhawk
    Post

    Question about thimble through brick wall

    It's a good 3 feet from the ceiling. The old thimble was already removed. I have the double wall hear that I can use. I guess maybe I could have...
    Post by: RugerRedhawk, Jan 19, 2013 in forum: The Hearth Room - Wood Stoves and Fireplaces
  19. RugerRedhawk
    Thread

    Question about thimble through brick wall

    I have an upland 207 I'm looking to install. It's going through an exterior wall on the first floor. There is a large section of wall that is brick...
    Thread by: RugerRedhawk, Jan 19, 2013, 10 replies, in forum: The Hearth Room - Wood Stoves and Fireplaces
  20. RugerRedhawk
    Post

    Have an upland 207, and some questions about the recommended pipe size

    Yeah I think 8" also makes the most sense, it's not a very tall chimney, maybe 12-15 feet. 7" round would be good, but this is just a shop heater so...
    Post by: RugerRedhawk, Jan 4, 2011 in forum: The Hearth Room - Wood Stoves and Fireplaces
Showing results 1 to 20 of 24 Next >
Search Again
Page 1 of 2