Hi Folks - I pulled everything apart, followed all tips that were given and found the problem - an air flow problem. Due to the lack of time I had...
Thanks for the great tips everyone, I am taking some time tonight after work to follow up on all of the advice that has been posted. Last night I...
Your set screw may have come loose...remove the front right panel and tighten the set screw. See if that resolves the problem.
Can you explain why bumping the LBA to 5 affects the efficiency of the heat exchange? Really appreciate it. I am currently testing the stove at...
The vents and the stove was cleaned one month ago, the two covers mentioned were also removed and vacuumed but I failed to use the mallot and tap...
Mike - do I have to access the rear of the stove to do that or is that the removable wall behind the burnpot?
Hello - I have a 10-CPM stove that is now burning Stove Chow pellets (used Maine Wood pellets last year). These pellets are not burning efficiently...
Thanks for your response on this issue, I worked with tech support (Patrick) who have concluded that there is a possible broken weld somewhere in the...
I have a 10-CPM that develops a vibration in the heat exchanger when the temperature at the vent exceeds 145 degrees (or depending on the type of...
I will simulate a power outage this weekend. Thanks!
Thanks for the response, yes I did install the Outside Air Kit. Good to know that you have not had that type of problem with a similar type setup.
Hello - This will be my first year using my pellet stove (10-CPM by Engander Stoves). I am really concerned about the loss of power resulting in a...
I tested my Englander 10-CPM for the first time along with Maine Wood Pellets. Although I thoroughly reviewed these pellets before purchasing I was...
Hello - would anyone who owns this multifuel model have any tips on the type of pellets that would work best? This will be my first time using this...
Separate names with a comma.
