Oh, but you seem to be forgetting about their "patentable" air baffle set-up! [img]
Nice wood box! If it was mine, I would line it with hammered copper, just for looks. Don't think much will keep bugs from climbing up the walls....
They have a kit for sale to do just that over on www.wood_alchemy.com , but it's really expensive. :cheese:
Like I said, this is just a guess here. Without a manual it is kind of sketchy, but I think what you have there, basically, are draft adjustment...
4.625" = 117.475 mm, so 120 mm is probably the ticket. That leaves 2.525 mm slop, which is less than an 1/8" difference (.0995" if you want to be...
My guess is that it is a dashpot for adjusting the voltage to the combustion fan motor. Are there 2 seperate small adjustment screws, 1 for high and...
You'll notice the hot and heavy bidding for this item......0 bids, but then again, there's six days & change left before it closes. For a shop with...
But, the board probably has something to do with how much voltage is supplied to the motor. If you want to screw up an electric motor, try...
Perhaps it might be a curcuit board problem? ....just a shot in the dark.
This post is worthless without pics! =O)
Was looking into dual smoke detectors, ionization & photoelectric type. Am considering a Kidde Mdl #PI 2000 120V w/ battery back-up, but would...
Nope! But I'm at work, ...... 40 miles away =O)
Wow, sounds to me like they should have used an ovalized flex liner to get through the damper. I would have the installer back to redo at his cost...
Why replace the liner, is it broken? Just cut it shorter and reinstall the rain cap, or get a chimney extention if you need the clearance height. I...
Hard to tell what you need to get the job done without actually seeing your set-up. Is there a damper in the fireplace? It might just be easier to...
Personally, I would use a bandsaw, but that is because I have access to industrial vertical and horizontal saws. Sometimes, being a machinist has...
Great, thanks for all your efforts!
Not sure if this is the proper forum for this question, but here goes anyway. Are all of the posts from the old forum still available for reference,...
Separate names with a comma.
